ASTM E761/E761M-92(2015)e1
Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members

Standard No.

ASTM E761/E761M-92(2015)e1

Release Date

1992

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM E761/E761M-92(2020)

Latest

ASTM E761/E761M-92(2023)

Scope

4.1 The intent of this test method is to determine properties of direct-applied SFRM that may be used to provide an indication of serviceability. Satisfactory performance of fire-resistive material applied to structural members and assemblies depends upon its ability while in place to withstand the various influences that may occur during the life of the structure, as well as upon its satisfactory performance under fire tests.

4.2 This test method measures the compressive strength of SFRM and is a measure of the resistance to deformation under a compressive load. It is an indication of the ability of SFRM to remain in place and resist removal during anticipated service conditions.

1.1 This test method covers a procedure for measuring the compressive strength of sprayed fire-resistive material (SFRM) applied to a rigid substrate. These fire-resistive materials include sprayed fibrous and cementitious materials applied directly in contact with these structural members. The test method is applicable to laboratory procedure.

1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM E761/E761M-92(2015)e1 Referenced Document

• ASTM D2092 Standard Guide for Preparation of Zinc-Coated (Galvanized) Steel Surfaces for Painting *， 1995-04-20 Update
• ASTM E119 Standard Test Methods for Fire Tests of Building Construction and Materials*， 1998-04-20 Update
• ASTM E605/E605M Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members*， 1993-04-20 Update
• ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials*， 1998-04-20 Update

ASTM E761/E761M-92(2015)e1 history

• 2023 ASTM E761/E761M-92(2023) Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
• 2020 ASTM E761/E761M-92(2020) Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
• 1992 ASTM E761/E761M-92(2015)e1 Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
• 2011 ASTM E761-92(2011) Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
• 1992 ASTM E761-92(2005) Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
• 1992 ASTM E761-92(2000) Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members