- Standard No.
- EN ISO 16828:2014
- Release Date
- 2014
- Published By
- European Committee for Standardization (CEN)
- Latest
-
EN ISO 16828:2014
- Replace
-
FprEN ISO 16828:2013
- Scope
- This International Standard specifies the general principles for the use of time-of-flight diffraction technology (TOFD) for the detection and sizing of inhomogeneities in low-alloy carbon steel components. The TOFD technique can also be applied to other types of materials if it is applied with the necessary consideration of the geometry, acoustic properties of the materials and test sensitivity. Although generally applicable to inhomogeneities in materials covered in ISO 16810, guidance for testing welds is also included. This path was chosen to clarify the positions of the ultrasound probe and the test directions. Unless otherwise specified in the reference documents, the minimum requirements of this International Standard shall apply. Unless expressly stated otherwise, this International Standard is applicable to the following product classes specified in ISO 16811: Class 1, without restrictions; Classes 2 and 3, with the restrictions stated. NOTE 1 See Section 9. Testing of Class 4 and Class 5 products requires special procedures, which are also noted. NOTE 2 See Section 9. NOTE 3 The TOFD techniques for inspecting welds are described in ISO 10863. NOTE 4 The relevant eligibility criteria are covered in ISO 15626.
EN ISO 16828:2014 Referenced Document
- EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
- EN 12668-2:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes
- EN 12668-3:2013 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment*， 2024-04-20 Update
- ISO 16810:2012 Non-destructive testing - Ultrasonic testing - General principles
- ISO 16811:2012 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
- ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel
EN ISO 16828:2014 history
- 2014 EN ISO 16828:2014 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
EN ISO 16828:2014 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities has been changed from EN 583-6:2008 Non-destructive testing - Ultrasonic examination - Part 6: Time-of-flight diffraction technique as a method for detection and sizing of discontinuities.