EN 16436-1:2014 Rubber and plastics hoses@ tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings (Incorporates Amendment A1: 2015)
This European Standard specifies the characteristics and performance requirements for tubing and hoses made of either rubber or plastics for use with commercial propane and commercial butane and mixtures thereof, in the vapour phase, for connection of appliances, from: pressurized gas container to a regulating device, pressurized gas container to an appliance, regulating device to an appliance, and regulating device to installation pipework, in environments of a temperature range from -30 °C to +70 °C. Working pressures are from 0 bar to 30 bar. Three classes are defined in Table 1 according to the maximum working pressures and minimum ambient temperatures. This European Standard only covers the tubing or hose part of assemblies. The assemblies themselves will be covered by EN 16436-2. This European Standard does not apply to hoses for: welding purposes (see EN ISO 3821, EN 1327); propulsion purposes; LPG transfer purposes (see EN 1762).
EN 16436-1:2014 Referenced Document
EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads; Dimensions, tolerances and designation
EN 12164:2011 Copper and copper alloys - Rod for free machining purposes
EN 1327:1996 Gas welding equipment - Thermoplastic hoses for welding and allied processes
EN 16129:2013 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures [Superseded: CEN EN 12864, CEN EN 12864
EN 461:1999 Specification for dedicated liquefied petroleum gas appliances - Flueless non-domestic space heaters not exceeding 10 kW (Incorporates Amendment A1: 2004)
EN 561:2002 Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes
EN ISO 10619-2:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2011)*， 2024-04-20 Update
EN ISO 1402:2009 Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009)*， 2024-04-20 Update
EN ISO 176:2005 Plastics - Determination of loss of plasticizers - Activated carbon method
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation ISO 228-1: 2000
EN ISO 30013:2011 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)*， 2024-04-20 Update
EN ISO 3821:2010 Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008)
EN ISO 4080:2009 Rubber and plastics hoses and hose assemblies - Determination of permeability to gas
EN ISO 4671:2007 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2007)*， 2024-04-20 Update
EN ISO 7326:2008 Rubber and plastics hoses - Assessment of ozone resistance under static conditions [Superseded: CEN EN 27326]
EN ISO 8033:2006 Rubber and plastics hoses - Determination of adhesion between components
EN ISO 8330:2008 Rubber and plastics hoses and hose assemblies - Vocabulary
ISO 105-A02:1993 Textiles; tests for colour fastness; part A02: grey scale for assessing change in colour
ISO 1817:2011 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids
ISO 188:2011 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
ISO 197-1:1983 Copper and copper alloys; Terms and definitions; Part 1 : Materials
ISO 197-3:1983 Copper and copper alloys; Terms and definitions; Part 3 : Wrought products
ISO 37:2011 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 8331:2014 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance
ISO/TR 17784:2003 Rubber and plastics hoses and hose assemblies - Guide for use by purchasers, assemblers, installers and operating personnel
EN 16436-1:2014 history
1970EN 16436-1:2014+A3:2020 Rubber and plastics hoses@ tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 2: Assemblies
2015EN 16436-1:2014+A1:2015 Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings
2014EN 16436-1:2014 Rubber and plastics hoses@ tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings (Incorporates Amendment A1: 2015)