EN 13765:2010+A1:2015 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
This European Standard specifies requirements for four types of thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for carrying hydrocarbons, solvents and chemicals. It specifies bore sizes from 25 mm to 300 mm, working pressures from 4 bar1) to 14 bar and working temperatures from -30 °C to 150 °C. Type 1 hoses are suitable for vapour applications. Types 2 to 4 hoses are suitable for liquid applications. NOTE 1 The attention of users is drawn to Annex A concerning the selection of the material for the inner wall of layers and any polymeric coating of the internal wire helix related to the chemical(s) to be conveyed by the hoses and/or hose assemblies. NOTE 2 The manufacturer should be consulted where a polymeric coated internal wire is being considered for use with low conductivity hydrocarbons or chemicals. This European Standard does not apply to hoses and hose assemblies for: Aircraft refuelling (EN 1361); Fuel dispensing (EN 1360); Oil burners (EN ISO 6806); Liquefied petroleum gas and liquefied natural gas (EN 13766); Fire fighting (EN ISO 14775); Offshore liquefied natural gas (EN 1474-2); Refrigeration circuits
EN 13765:2010+A1:2015 Referenced Document
EN 10088-3:2005 Stainless steels - Part 3: Technical delivery conditions for semifinished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 590:2013 Automotive fuels - Diesel - Requirements and test methods (Incorporates Amendment A1: 2017)
EN ISO 1043-1:2011 Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011)*, 2024-04-20 Update
EN ISO 10619-1:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2011)*, 2024-04-20 Update
EN ISO 1402:2009 Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009)*, 2024-04-20 Update
EN ISO 2411:2000 Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2000)
EN ISO 4671:2007 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2007)*, 2024-04-20 Update
EN ISO 4672:1999 Rubber and Plastics Hoses - Sub-Ambient Temperature Flexibility Tests
EN ISO 7233:2008 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum
EN ISO 7326:2008 Rubber and plastics hoses - Assessment of ozone resistance under static conditions [Superseded: CEN EN 27326]
EN ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity*, 2024-04-20 Update
EN ISO 8330:2008 Rubber and plastics hoses and hose assemblies - Vocabulary
ISO 1817:2011 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids
ISO 209:2007 Aluminium and aluminium alloys - Chemical composition
EN 13765:2010+A1:2015 history
2018EN 13765:2018 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons@ solvents and chemicals - Specification
2015EN 13765:2010+A1:2015 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
2010EN 13765:2010 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification (Incorporates Amendment A1: 2015)
2003EN 13765:2003 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification