This European Standard applies for:- filling machines with cylinder with piston; - filling machines with feed intake hopper with and without loading device; - auxiliary machines for filling machines. This European Standard does not apply to filling machines with cylinder and manual operation. This European Standard applies to machines which process pasty or slightly frozen products (e. g. meat, cheese), excluding dry or deep frozen materials. They pump foodstuff into casings or bring it to a subsequent process. This European Standard also applies to the combinable appliances or auxiliary machines with which a wide range of additional functions can be implemented, for example: portioning, depositing, mincing, coextruding, dividing and forming. This European Standard deals with all significant hazards, hazardous situations and events relevant to filling machines, fitting appliances and auxiliary machines, such as twisting and hanging devices, mincing devices, forming devices, etc., when they are used as intended and under the conditions foreseen by the manufacturer and also the reasonable foreseeable misuse (see Clause 4). These significant hazards, hazardous situations and events exist during the whole life of filling machines.
EN 12463:2014 Referenced Document
EN 1037:1995 Safety of machinery - Prevention of unexpected start-up (Incorporates Amendment A1: 2008)
EN 415-3:1999 Safety of packaging machines - Part 3: Form, fill and seal machines (Incorporates Amendment A1: 2009)
EN 60204-1:2006 Safety of machinery - Electrical equipment of machines Part 1: General requirements (Incorporates Amendment A1: 2009; Incorporating corrigendum February 2010)
EN 60529:1991 Degrees of Protection Provided by Enclosures (IP Code) (Incorporates Amendments A1: 2000 and A2: 2013)
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
EN 61496-1:2013 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests*, 2024-04-20 Update
EN 894-1:1997 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators (Incorporates Amendment A1: 2008)
EN 894-2:1997 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays (Incorporates Amendment A1: 2008)
EN 894-3:2000 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators (Incorporates Amendment A1: 2008)
EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
EN ISO 11204:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)
EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)*, 2024-04-20 Update
EN ISO 13849-1:2008 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
EN ISO 13855:2010 Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010)
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs [Superseded: CEN EN 294, CEN EN 811]
EN ISO 14119:2013 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection [Superseded: CEN EN 1088]*, 2024-04-20 Update
EN ISO 14122-3:2001 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails Incorporates Amendment A1: 2010
EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)*, 2024-04-20 Update
EN ISO 4413:2010 Hydraulic fluid power - General rules and safety requirements for systems and their components
EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
EN 12463:2014 history
2021EN 12463:2021 Food processing machinery - Filling machines and interchangeable equipment - Safety and hygiene requirements
2014EN 12463:2014 Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements
2004EN 12463:2004 Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements