This European Standard specifies the technical requirements to minimize the hazards listed in Clause 4 which can arise during the commissioning, operation and maintenance of passenger boarding bridges (PBBs) when used as intended, including misuse reasonably foreseeable by the manufacturer, when carried out in accordance with the specifications given by the manufacturer or his authorized representative. It also takes into account some requirements recognized as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies. This European Standard applies to: a) apron-drive bridges; b) fixed-head bridges (also referred to as nose-loaders) or pedestal bridges; c) suspended bridges, for embarking/disembarking of passengers. It is applicable from the interface with the terminal building, which can be movable, e. g. on two levels to separate arrival and departure level to the connection with the aircraft including fixed tunnels. This European Standard does not apply to: d) elevating lounges; e) passenger stairs; f) other form of aircraft access equipment; g) automatic PBB positioning. This European Standard does not establish requirements for hazards caused by noise and vibration. NOTE EN 1915-3 and EN 1915-4 provide the general GSE vibration and noise requirements. This part of EN 12312 is not applicable to PBBs which were manufactured before the date of publication of this standard by CEN. This part of EN 12312 when used in conjunction with EN 1915-1, EN 1915-2 and EN 1915-4 provides the requirements for PBBs.
EN 12312-4:2014 Referenced Document
DIN 51130:2004 Testing of floor coverings - Determination of the anti-slip properties - Workrooms and fields of activities with slip danger, walking method - Ramp test
EN 12150-1:2000 Glass in Building - Thermally Toughened Soda Lime Silicate Safety Glass - Part 1: Definition and Description
EN 1915-1:2013 Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
EN 1915-3:2004 Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction (Incorporates Amendment A1: 2009)*, 2024-04-20 Update
EN 1915-4:2004 Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction (Incorporates Amendment A1: 2009)*, 2024-04-20 Update
EN 60332-1-1:2004 Tests on electric and optical fibre cables under fire conditions Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus*, 2024-04-20 Update
EN 60332-1-2:2004 Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame*, 2024-04-20 Update
EN 60332-1-3:2004 Tests on electric and optical fibre cables under fire conditions Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles*, 2024-04-20 Update
EN 60332-2-1:2004 Tests on electric and optical fibre cables under fire conditions Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable Apparatus*, 2024-04-20 Update
EN 60332-2-2:2004 Tests on electric and optical fibre cables under fire conditions Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame*, 2024-04-20 Update
EN 60332-3-10:2009 Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus*, 2024-04-20 Update
EN 60332-3-21:2009 Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R (Remains Current)
EN 60332-3-22:2009 Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A*, 2024-04-20 Update
EN 60332-3-23:2009 Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B*, 2024-04-20 Update
EN 60332-3-24:2009 Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C*, 2024-04-20 Update
EN 60332-3-25:2009 Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D*, 2024-04-20 Update
EN 62061:2005 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems (Incorporating Corrigendum February 2010; Incorporates Amendment A1: 2013)
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)*, 2024-04-20 Update
EN ISO 13849-1:2008 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
EN ISO 13850:2008 Safety of machinery - Emergency stop - Principles for design
EN ISO 7010:2012 Graphical symbols - Safety colours and safety signs - Registered safety signs (Incorporates Amendment A5: 2015)
ISO 11995:1996 Aircraft - Stability requirements for loading and servicing equipment
ISO 16004:2005 Aircraft ground equipment - Passenger boarding bridge or transfer vehicle - Requirements for interface with aircraft doors
ISO 3795:1989 Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials
ISO 7718-1:2009 Aircraft - Passenger doors interface requirements for connection of passenger boarding bridge - Part 1: Main deck doors
ISO 7718-2:2009 Aircraft - Passenger doors interface requirements for connection of passenger boarding bridge - Part 2: Upper deck doors
EN 12312-4:2014 history
2014EN 12312-4:2014 Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges
2003EN 12312-4:2003 Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges Incorporates Amendment A1: 2009