EN 1870-3:2014 Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches, herein after referred to as "machines", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic edging and/or plastic/light alloy laminates when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. NOTE 1 For the definition of down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches, see 3.2.2, 3.2.3 and 3.2.4, and for the definition of displaceable machine, see 3.2.8. This document does not apply to: - machines for cross cutting logs; - hand-held motor-operated electric tools or any adaptation permitting their use in a different mode, e. g. bench mounting; NOTE 2 Hand-held motor-operated electric tools and saw benches to form an integrated whole with a hand-held motor- operated electric tools are covered by EN 60745-1:2009 together with EN 60745-2-5:2010; - transportable machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand i.e. maximum mass 25 kg. NOTE 3 Transportable motor-operated electric tools are covered by the requirements of EN 61029-1:2009 together with EN 61029-2-9:2009 and EN 61029-2-11:2009. This document is not applicable to down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches which are manufactured before the date of its publication as European Standard.
EN 1870-3:2014 Referenced Document
EN 1870-19:2013 Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws*， 2024-04-20 Update
EN 50370-1:2005 Electromagnetic compatibility (EMC) Product family standard for machine tools Part 1: Emission
EN 50370-2:2003 Electromagnetic compatibility (EMC) - Product family standard for machine tools Part 2: Immunity
EN 50525-1:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 1: General requirements
EN 50525-2-21:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-21: Cables for general applications - Flexible cables with crosslinked elastomeric insulation
EN 60204-1:2006 Safety of machinery - Electrical equipment of machines Part 1: General requirements (Incorporates Amendment A1: 2009; Incorporating corrigendum February 2010)
EN 60439-1:1999 Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies (Incorporates Amendment A1: 2004; Incorporating Corrigendum No. 1)
EN 60529:1991 Degrees of Protection Provided by Enclosures (IP Code) (Incorporates Amendments A1: 2000 and A2: 2013)
EN 60825-1:2007 Safety of laser products - Part 1: Equipment classification and requirements
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN 847-1:2013 Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades*， 2024-04-20 Update
EN 1870-3:2014 history
2014EN 1870-3:2014 Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
2001EN 1870-3:2001 Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches Incorporates Amendment A1: 2009 [Superseded: BSI BS EN 1870-3 + A1, BSI BS EN 1870-3, BSI BS