KS C IEC 60730-2-6:2014 PDF

Scope: This clause of Part 1 is applicable except as follows: 1.1 Replacement: This standard applies to pressure-sensitive automatic controls having a minimum rated gauge pressure of 60 kPa and a maximum rated gauge pressure of 4.2 MPa. It is intended for use in, installed on, or in connection with appliances for domestic and similar purposes capable of utilizing electricity, gas, oil, solid fuels, solar energy, etc., including heating, air conditioning and similar uses.1.1. 1 Replacement: This standard applies for intrinsic safety when the operating values, number of operations and sequence of operations are relevant to machine safety. and for testing automatic control systems used in or in connection with household or similar appliances. In this standard, “appliance” means “instrument and equipment.” This standard It does not apply to pressure-sensing controls intended only for industrial use. This standard also applies to mechanically integrated pressure-sensing controls, as individual controls or multi-function controls with non-electrical outputs, which are used assembled in a control system. .Appliances that may be used by the general public even though they are not normally used at home, for example, by beginners in shops, light industry, or on farms.

KS C IEC 60730-2-6:2014 history

2020 KS C IEC 60730-2-6:2020 Automatic electrical controls — Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
2014 KS C IEC 60730-2-6:2014 Automatic electrical controls for household and similar use — Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
2002 KS C IEC 60730-2-6:2002 Automatic electrical controls for household and similar use-Part 2-6:Particular requirements for automatic electrical pressure sensing controls including mechanical requirements