ASTM D3699-13be1
Standard Specification for Kerosine

Standard No.
ASTM D3699-13be1
Release Date
2013
Published By
American Society for Testing and Materials (ASTM)
Status
Replace By
ASTM D3699-18
Latest
ASTM D3699-19
Scope

1.1 This specification covers two grades of kerosine suitable for use in critical kerosine burner applications:

1.1.1 No. 1-K—A special low-sulfur grade kerosine suitable for use in nonflue-connected kerosine burner appliances and for use in wick-fed illuminating lamps.

1.1.2 No. 2-K—A regular grade kerosine suitable for use in flue-connected burner appliances and for use in wick-fed illuminating lamps.

1.2 This specification is intended for use in purchasing, as a reference for industry and governmental standardization, and as a source of technical information.

1.3 This specification, unless otherwise provided by agreement between the purchaser and the supplier, prescribes the required properties of kerosine at the time and place of custody transfer.

Note 1: The generation and dissipation of static electricity can create problems in the handling of kerosines. For more information on the subject, see Guide D4865.

1.4 Nothing in this specification shall preclude observance of federal, state, or local regulations which can be more restrictive.

1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

ASTM D3699-13be1 Referenced Document

  • ASTM D1266 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
  • ASTM D130 Standard Test Method for Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test
  • ASTM D156 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
  • ASTM D187 Standard Test Method for Burning Quality of Kerosine
  • ASTM D2386 Standard Test Method for Freezing Point of Aviation Fuels
  • ASTM D2622 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ASTM D2887 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
  • ASTM D3227 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
  • ASTM D3828 Standard Test Methods for Flash Point by Small Scale Closed Tester
  • ASTM D4294 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
  • ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
  • ASTM D4865 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
  • ASTM D4952 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
  • ASTM D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
  • ASTM D56 Standard Test Method for Flash Point by Tag Closed Tester
  • ASTM D5901 Standard Test Method for Freezing Point of Aviation Fuels (Automated Optical Method)
  • ASTM D5972 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
  • ASTM D6469 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
  • ASTM D7094 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
  • ASTM D7220 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
  • ASTM D86 Standard Test Method for Distillation of Petroleum Products

ASTM D3699-13be1 history

Standard Specification for Kerosine


Copyright ©2024 All Rights Reserved