DIN 2197-2:2015
Screwing taps - Part 2: Technical delivery conditions for ground carbide taps

Standard No.

DIN 2197-2:2015

Release Date

2015

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN 2197-2:2015-03

Latest

DIN 2197-2:2015-03

Replace

DIN 2197:2008 DIN 2197-2:2014

DIN 2197-2:2015 Referenced Document

• DIN 10:2009 Squares of parallel shanks for rotating tools
• DIN 202:1999 Screw threads - General plan
• DIN 2181:2003 Sets of 2 taps for metric fine ISO-threads M1 × 0,2 to M52 × 4
• DIN 2184-1:2015 Taps and cold forming taps - Part 1: Long type; General plan of dimensions
• DIN 2184-2:2003 Taps and cold forming taps - Part 2: Short type; General plan of dimensions
• DIN 323-1:1974 Preferred Numbers and Series of Preferred Numbers; Basic Values, Calculated Values, Rounded Values
• DIN 332-1:1986 60° centre holes; types R, A, B, and C
• DIN 336:2003 Diameters of drills for minor diameters of tapped threads
• DIN 352:2008 Sets of taps - Sets of 3 taps for metric coarse ISO-threads M1 to M68
• DIN 357:2008 Machine nut taps for coarse pitch metric ISO-threads M3 to M68
• DIN 371:2008 Machine taps with reinforced shank for coarse pitch metric ISO-threads M1 to M10 and fine pitch metric ISO-threads M1 × 0,2 to M10 × 1,25
• DIN 374:2008 Machine screwing taps for fine pitch metric ISO-threads M3 × 0,2 to M52 × 4
• DIN 376:2008 Machine screwing taps for coarse pitch metric ISO-thread M3 to M68
• DIN 5157:2011 Sets of taps - Sets of 2 taps for pipe threads G 1/16 to G 4 and Rp 1/16 to Rp 4
• DIN 802-3:2008 Tolerances on the threaded portion of taps - Part 3: Ground taps for pipe thread (G) according to DIN EN ISO 228-1 and pipe thread (Rp) according to DIN EN 10226-1 - Manufacturing tolerances on the threaded portion
• DIN 802-4:2012 Ground thread taps for ISO metric threads of tolerances 7G, 8G and special tolerances, coarse and fine pitches - Part 4: Manufacturing tolerances on the threaded portion
• DIN EN 22857:1990 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion (ISO 2857:1973 incl. AMD 1:1984 and AMD 2:1986); german version EN 22857:1989

DIN 2197-2:2015 history

• 2015 DIN 2197-2:2015-03 Screwing taps - Part 2: Technical delivery conditions for ground carbide taps
• 2015 DIN 2197-2:2015 Screwing taps - Part 2: Technical delivery conditions for ground carbide taps
• 1970 DIN 2197-2 E:2014-07
• 0000 DIN 2197-2:2014
• 2008 DIN 2197:2008 Screwing taps - Technical delivery conditions for ground high-speed steel taps
• 0000 DIN 2197:2007
• 1998 DIN 2197:1998 Screwing taps - Technical delivery conditions for grinded high-steel taps