SAE AMS3349D-2014 PDF

Scope: This specification covers a silicone (VMQ) rubber in the form of sheet, strip, tubing, molded shapes and extrusions. These products have been used typically for parts required to operate or seal from -65 to +205 degrees C (-85 to +401 degrees F), compounded especially for high strength and resiliency, but usage is not limited to such applications. Silicone elastomer is resistant to deterioration by weathering and aircraft piston engine oil and remains flexible over the temperature range noted. This material is not normally suitable for use in contact with gasoline or aromatic fuels and low-aniline-point petroleum-base fluids due to excessive swelling of the

SAE AMS3349D-2014 Referenced Document

ASTM D1415-06 Standard Test Method for Rubber Property8212;International Hardness*， 2024-04-20 Update
ASTM D2137-11 Standard Test Methods for Rubber PropertyBrittleness Point of Flexible Polymers and Coated Fabrics*， 2024-04-20 Update
ASTM D2240-05 Standard Test Method for Rubber Property8212;Durometer Hardness*， 2024-04-20 Update
ASTM D2632-01 Standard Test Method for Rubber Property—Resilience by Vertical Rebound
ASTM D297-13 Standard Test Methods for Rubber Productsmdash;Chemical Analysis*， 2024-04-20 Update
ASTM D395-03 Standard Test Methods for Rubber Property8212;Compression Set*， 2024-04-20 Update
ASTM D412-06 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension*， 2024-04-20 Update
ASTM D471-12 Standard Test Method for Rubber Propertymdash;Effect of Liquids*， 2024-04-20 Update
ASTM D573-04 Standard Test Method for Rubber8212;Deterioration in an Air Oven*， 2024-04-20 Update
ASTM D624-00 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers*， 2024-04-20 Update
SAE AMS2279 TOLERANCES Rubber Products

2014 SAE AMS3349D-2014 Silicone (VMQ) Rubber, 1100 psi (7.58 MPa) Tensile Strength, High Resiliency, 65 - 75
2011 SAE AMS3349B-2011 SILICONE (VMQ) RUBBER 1100 psi (7.60 MPa) Tensile Strength, High Resiliency 65 - 75
2007 SAE AMS3349C-2007 Silicone (VMQ) Rubber 1100 psi (7.58 MPa) Tensile Strength, High Resiliency 65 - 75
1993 SAE AMS3349C-1993 Silicone (VMQ) Rubber 1100 psi (7.58 MPa) Tensile Strength, High Resiliency 65 - 75
1977 SAE AMS3349A-1977 SILICONE RUBBER 1100 psi (7.58 MPa) Tensile Strength, High Resiliency 65 - 75
1969 SAE AMS3349-1969 SILICONE RUBBER 1100 psi, High Resilience 65 - 75