ASTM A706/A706M-14
Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement

Standard No.

ASTM A706/A706M-14

Release Date

2014

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM A706/A706M-15

Latest

ASTM A706/A706M-22a

Scope

1.1 General—This specification covers deformed and plain low-alloy steel bars in cut lengths and coils for concrete reinforcement intended for applications where restrictive mechanical properties and chemical composition are required for compatibility with controlled tensile property applications or to enhance weldability. The standard sizes and dimensions of deformed bars and their number designations are given in Table 1.

TABLE 1 Deformed Bar Designation Numbers, Nominal Weights [Masses], Nominal Dimensions, and Deformation Requirements

Bar Desig- nation No.	Nominal Weight, lb/ft [Nominal Mass, kg/m]	Nominal DimensionsA			Deformation Requirements, in. [mm]
		Diameter, in. [mm]	Cross-Sectional Area in. 2 [mm 2]	Perimeter, in. [mm]	Maximum Average Spacing	Minimum Average Height	Maximum Gap (Chord of 12.58201;% of Nominal Perimeter)
8199;38201; [10]	8199;0.3768199;[8199;0.560]	0.3758199;[8199;9.5]	0.118199;[8199;8199;71]