This standard specifies the classification and model, materials, structure and connection dimensions, requirements, test methods, inspection rules, marking, packaging, transportation and storage of manual gas valves for construction (hereinafter referred to as valves). This standard applies to non-directly buried gas devices and equipment installed inside and outside buildings with a nominal pressure not greater than 1.6 MPa, a nominal size not greater than 100 mm, an operating temperature not exceeding -20 ℃ ~ 60 ℃, and its lower limit not being lower than the gas dew point temperature. Manual gas ball valves and bottom sealed stopcocks on the facility. The gas referred to in this standard is the gas that complies with the provisions of GB/T 13611.
GB/T 7306.1 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1:Parallel internal and taper external threads
GB/T 7306.2 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2:Taper internal and external threads
GB/T 7307 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
GB/T 9112 Types and parameters for steel pipe flanges
GB/T 9439 Gray cast iron parts*, 2023-09-07 Update