This part of SY/T 6952 specifies the product specifications, technical requirements, manufacturing methods, testing and evaluation methods of technical casings and production casings for heavy oil steam thermal recovery wells. This section is applicable to heavy oil steam thermal recovery well casings where the temperature of the heated steam in the casing is not higher than 350°C and the wellhead steam injection pressure is not higher than 27MPa. Matters not specified in this section shall be subject to the requirements specified in GB/T 19830.
SY/T 6952.2-2013 Referenced Document
GB/T 10561 Standard grading chart microscopic examination method for determination of non-metallic inclusion content in steel*, 2023-05-23 Update
GB/T 11261 Steel and lron - Determination of oxygen content - The pulse heating inert gas fusion-infra-red absorption method
GB/T 13298 Inspection methods of microstructure for metals
GB/T 13299 Determination of free cementite, pearlite and Widmanstaten structure in steel*, 2022-07-11 Update
GB/T 19830 Steel pipes for oil and gas well casing or tubing in the oil and gas industry*, 2023-11-27 Update
GB/T 20123 Steel and iron - Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method)
GB/T 20124 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method)
GB/T 2039 Metallic materials.Uniaxial creep testing method in tension
GB/T 222 Permissible tolerances for chemical composition of steel products
GB/T 223.82 Steel and iron.Determination of hydrogen content.Thermal conductivity/infrared method after fusion under inert gas*, 2018-05-14 Update
GB/T 224 Determination of the depth of decarburization of steels*, 2019-06-04 Update
GB/T 228.1 Metallic materials—Tensile testing—Part 1: Method of test at room temperature*, 2021-12-31 Update
GB/T 229 Metallic materials—Charpy pendulum impact test method*, 2020-09-29 Update
GB/T 4336 Determination of multi-element content in carbon steel and medium and low alloy steel Spark discharge atomic emission spectrometry (conventional method) Amendment No. 1
GB/T 4338 Metallic materials.Tensile testing at elevated temperature
GB/T 5777 Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections*, 2019-06-04 Update
GB/T 6394 Determination of estimating the average grain size of metal*, 2017-02-28 Update
SY/T 4109 Nondestructive testing of oil and gas steel pipeline*, 2020-10-23 Update
SY/T 6952.2-2013 history
2013SY/T 6952.2-2013 Thermal casing string for strain-based design.Part 2: Casing