EN 1012-3:2013
Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors

Standard No.
EN 1012-3:2013
Release Date
2013
Published By
European Committee for Standardization (CEN)
Latest
EN 1012-3:2013
Replace
FprEN 1012-3-2013
Scope
This European Standard is applicable to process gas compressors and process gas compressor units having an operating pressure greater than 0,5 bar (gauge), an input shaft power greater than 0,5 kW and designed to compress all gases other than air, nitrogen or inert gases which are covered in Part 1. This document deals with all significant hazards, hazardous situations and events relevant to the design, installation, operation, maintenance, dismantling and disposal of process gas compressors and process gas compressor units, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This part of EN 1012 includes under the general term compressor units those machines which comprise: the compressor; a drive system including the prime mover; any component or device supplied which is necessary for operation. This part of EN 1012 is not applicable to compressors which are manufactured before the date of publication of this document by CEN. The requirements of this European Standard do not take into account the interaction between the compressor/compressor unit and other processes carried out on site. Excluded are: refrigerant compressors used in refrigerating systems or heat pumps for which the safety requirements are given in EN 60335-2-34 or EN 12693; the specification of performance levels and/or safety integrity levels for safety related parts of control systems. Performance levels and/or safety integrity levels are an important aspect of compressor design and should be determined by the manufacturer and the user based on a risk assessment (see Introduction). This European Standard does not cover those safety aspects of road transport dealt with by EC legislation for trailers.

EN 1012-3:2013 Referenced Document

  • EN 1005-2:2003 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery (Incorporates Amendment A1: 2008)
  • EN 1005-3:2002 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation Incorporates Amendment A1: 2008
  • EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
  • EN 12021:1998 Respiratory Protective Devices - Compressed Air for Breathing Apparatus
  • EN 12195-1:2010 Load restraining on road vehicles - Safety - Part 1: Calculation of securing forces
  • EN 13001-2:2011 Crane safety - General design - Part 2: Load actions (Incorporating corrigendum March 2012)
  • EN 13155:2003 Cranes - Safety - Non-fixed load lifting attachments (Incorporates Amendment A2: 2009)
  • EN 13309:2010 Construction machinery - Electromagnetic compatibility of machines with internal power supply
  • EN 13445-5:2009 Unfired pressure vessels - Part 5: Inspection and testing
  • EN 13445-6:2009 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
  • EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
  • EN 764-7:2002 Pressure equipment - Part 7: Safety systems for unfired pressure equipment
  • EN 837-2:1997 Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges

EN 1012-3:2013 history

  • 2013 EN 1012-3:2013 Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors



Copyright ©2024 All Rights Reserved