ISO 18422:2014
Ships and marine technology - Inland navigation vessels - Plate with instructions for rescue, resuscitation and first aid for drowning persons

Standard No.

ISO 18422:2014

Release Date

2014

Published By

International Organization for Standardization (ISO)

Latest

ISO 18422:2014

Scope

This International Standard specifies a plate with instructions for rescue, resuscitation and first aid of drowning persons. This plate is intended for use — on inland navigation vessels; — at suitable places on the shore of inland waterways, e.g. harbours, berths, locks, sluices, etc.; — at other suitable places. The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. indication of machine direction tolerance indications 3 Dimensions and shape General tolerances: ISO 2768 - c Shape is typically rectangular, but may also be circular for installation at or in lifebuoy housings. The recommended dimension is A3 according to ISO 216. Other suitable dimensions are A4 according to 4 Design 4.1 Material The plate shall be of resistant material. This requirement is fulfilled if the plate is made of: — PVC: hard PVC with a thickness of at least 1 mm, or — Al: aluminium with a thickness of at least 0,5 mm, or — lP: laminated paper or coated paper, or — PVC F: PVC — as self-adhesive foil. NOTE Polystyrene is not suitable, because it is not sufficiently resistant against cold impact. Plates made of hard PVC or aluminium shall have suitable bore holes in the corners for mounting.  Licensee=University of Alberta/5966844001, User=sharabiani, shahramfs 1

ISO 18422:2014 Referenced Document

• ISO 216:2007 Writing paper and certain classes of printed matter - Trimmed sizes - A and B series, and indication of machine direction
• ISO 2768-1:1989 General tolerances; part 1: tolerances for linear and angular dimensions without individual tolerance indications

ISO 18422:2014 history

• 2014 ISO 18422:2014 Ships and marine technology - Inland navigation vessels - Plate with instructions for rescue, resuscitation and first aid for drowning persons