ASTM D7517-09(2014)
Standard Specification for Fully-Formulated 1,3 Propanediol 40;PDO41; Base Engine Coolant for Heavy-Duty Engines
- Standard No.
- ASTM D7517-09(2014)
- Release Date
- 2009
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM D7517-19
- Latest
- ASTM D7517-19
- Scope
1.1 This specification covers the requirements for fully-formulated glycol base coolants for cooling systems of heavy-duty engines. When concentrates are used at 40 to 60 % PDO concentration by volume in water of suitable quality, (see Appendix X1), or when prediluted PDO base engine coolants (50 volume % minimum) are used without further dilution, they will function effectively during both winter and summer to provide protection against corrosion, cavitation, freezing, and boiling.
1.2 The coolants governed by this specification are categorized as follows:
Coolant Type
Description
I-FF
1,3 Propanediol base concentrate
II-FF
1,3 Propanediol predilute (50 vol %)
1.3 Coolant concentrates meeting this specification do not require any addition of Supplemental Coolant Additive (SCA) until the first maintenance interval when a maintenance dose of SCA is required to continue protection in certain heavy-duty engine cooling systems, particularly those of the wet cylinder liner-in-block design. The SCA additions are defined by and are the primary responsibility of the engine manufacturer or vehicle manufacturer. If they provide no instructions, follow the SCA supplier's instructions.
1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D7517-09(2014) Referenced Document
- ASTM D1126 Standard Test Method for Hardness in Water
- ASTM D1287 Standard Test Method for pH of Engine Coolants and Antirusts
- ASTM D1293 Standard Test Methods for pH of Water
- ASTM D4327 Standard Test Method for Anions in Water by Chemically Suppressed Ion Chromatography
- ASTM D4725 Standard Terminology for Engine Coolants
- ASTM D512 Standard Test Methods for Chloride Ion In Water
- ASTM D516 Standard Test Method for Sulfate Ion in Water
- ASTM D5827 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
- ASTM D5828 Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates
- ASTM D6130 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
- ASTM D7518 Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service
- ASTM E394 Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
ASTM D7517-09(2014) history
- 2019 ASTM D7517-19 Standard Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines
- 2009 ASTM D7517-09(2014) Standard Specification for Fully-Formulated 1,3 Propanediol 40;PDO41; Base Engine Coolant for Heavy-Duty Engines
- 2009 ASTM D7517-09 Standard Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines
