This European Standard specifies the requirements of pavers and accessories manufactured from clay for use in the flexible form of construction (see 3.10) and in the rigid form of construction (see 3.11). This European Standard applies to rectangular and other shaped units intended as construction products in pavements mainly for exterior use, including roofs as roof paving units, but which may also be used internally. The flexible form of construction is subjected to pedestrian and vehicular traffic, while the rigid form of construction is usually subjected to pedestrian traffic. This European Standard specifies the characteristics and classes of performance and corresponding test methods. It provides for product marking and for the evaluation of conformity of the product to this European Standard. This European Standard covers only clay pavers and accessories with or without coatings and with or without post firing chemical treatment which do not contain any material with asbestos fibres nor contain formaldehyde. It excludes products intended for refractory and chemical engineering applications and clay floor tiles. It also excludes clay masonry units. This European standard does not cover clay pavers having tactile surfaces.
EN 1344:2013 Referenced Document
EN 13501-1:2007 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests (Incorporates Amendment A1: 2009)
EN 13501-5:2005 Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests (Incorporates Amendment A1: 2009)
EN 1745:2012 Masonry and masonry products - Methods for determining thermal properties
ISO 3310-1:2000 Test sieves - Technical requirements and testing - Part 1: Test sieves of metal wire cloth
ISO 630-1:2011 Structural steels - Part 1: General technical delivery conditions for hot-rolled products
ISO 630-2:2011 Structural steels - Part 2: Technical delivery conditions for structural steels for general purposes
ISO 630-3:2012 Structural steels - Part 3: Technical delivery conditions for fine-grain structural steels
ISO 630-4:2012 Structural steels - Part 4: Technical delivery conditions for high-yield-strength quenched and tempered structural steel plates
ISO 8486-1:1996 Bonded abrasives - Determination and designation of grain size distribution - Part 1: Macrogrits F4 to F220