ASTM F2922-13e1
Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
- Standard No.
- ASTM F2922-13e1
- Release Date
- 2013
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM F2922-13(2018)
- Latest
- ASTM F2922-13(2018)
- Scope
1.1 This specification covers requirements, test methods, materials, and marking for polyethylene (PE), open bottom, buried arch-shaped chambers of corrugated wall construction used for collection, detention, and retention of stormwater runoff. Applications include commercial, residential, agricultural, and highway drainage, including installation under parking lots and roadways.
1.2 Chambers are produced in arch shapes with dimensions based on chamber rise, chamber span, and wall stiffness. Chambers are manufactured with integral feet that provide base support. Chambers may include perforations to enhance water flow. Chambers must meet test requirements for arch stiffness, flattening, and accelerated weathering.
1.3 Analysis and experience have shown that the successful performance of this product depends upon the type and depth of bedding and backfill, and care in installation. This specification includes requirements for the manufacturer to provide chamber installation instructions to the purchaser.
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5 The following safety hazards caveat pertains only to the test method portion, Section 6, of this specification:
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM F2922-13e1 Referenced Document
- ASTM D1600 Standard Terminology for Abbreviated Terms Relating to Plastics
- ASTM D2122 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
- ASTM D2412 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
- ASTM D2990 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
- ASTM D3350 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials*， 2024-04-20 Update
- ASTM D4329 Standard Practice for Fluorescent UV Exposure of Plastics
- ASTM D4703 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
- ASTM D618 Standard Practice for Conditioning Plastics for Testing
- ASTM D6992 Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
- ASTM F2136 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
- ASTM F2787 Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
- ASTM F412 Standard Terminology Relating to Plastic Piping Systems
ASTM F2922-13e1 history
- 2018 ASTM F2922-13(2018) Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
- 2013 ASTM F2922-13e1 Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
- 2013 ASTM F2922-13 Standard Specification for Polyethylene lpar;PErpar; Corrugated Wall Stormwater Collection Chambers
- 2012 ASTM F2922-12e1 Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
- 2012 ASTM F2922-12 Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
