ASTM F3035-13
Standard Practice for Production Acceptance in the Manufacture of a Fixed Wing Light Sport Aircraft
- Standard No.
- ASTM F3035-13
- Release Date
- 2013
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM F3035-22
- Latest
- ASTM F3035-22
- Scope
4.1 The purpose of this practice is to provide the minimum requirements necessary for the establishment of a production acceptance program for a manufacturer of light sport aircraft.
4.2 The purpose of this specification is to provide the minimum requirements for the establishment of a ground and flight test program for verifying the initial production aircraft meets certain operational performance requirements that have been set forth by the manufacturer in its Pilot’s Operating Handbook (POH).
4.3 In addition, this specification provides minimum requirements to verify that each subsequent production airplane has no obvious defects that would prevent the safe operation of the airplane.
4.4 All requirements given in this specification are to be performed in accordance with the manufacturer’s Specification F2972-compliant quality assurance system requirements.
4.5 The following criteria should not be construed as requirements for specific features to be included on a LSA. When a requirement specifies a feature that does not exist on a LSA, the requirement does not apply.
1.1 The following requirements apply for the manufacture of fixed wing aircraft, including gliders. This practice includes the production acceptance test requirements.
1.2 This practice applies to aircraft seeking civil aviation authority approval, in the form of flight certificates, flight permits, or other like documentation.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM F3035-13 Referenced Document
- ASTM F2245 Standard Specification for Design and Performance of a Light Sport Airplane
- ASTM F2564 Standard Specification for Design and Performance of a Light Sport Glider
- ASTM F2972 Standard Specification for Light Sport Aircraft Manufacturer’s Quality Assurance System
ASTM F3035-13 history
- 2022 ASTM F3035-22 Standard Practice for Production Acceptance in the Manufacture of a Fixed Wing Light Sport Aircraft
- 2013 ASTM F3035-13 Standard Practice for Production Acceptance in the Manufacture of a Fixed Wing Light Sport Aircraft
