IEC 62056-3-1:2013
Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of local area networks on twisted pair with carrier signalling

Standard No.

IEC 62056-3-1:2013

Release Date

2013

Published By

International Electrotechnical Commission (IEC)

Status

Be replaced

Replace By

IEC 62056-3-1:2021 RLV

Latest

IEC 62056-3-1:2021 RLV

Replace

IEC 13/1546/FDIS:2013 IEC 62056-31:1999

Scope

This part of IEC 62056 describes three profiles for local bus data exchange with stations either energized or not. For non-energized stations@ the bus supplies energy for data exchange. Three different profiles are supported: ? base profile: this three-layer profile provides remote communication services; NOTE This first profile has been published in IEC 61142:1993 and became known as the Euridis standard. ? profile with DLMS: this profile allows using DLMS services as specified in IEC 61334-4-41; NOTE This second profile has been published in IEC 62056-31 Ed. 1.0:1999; ? profile with DLMS/COSEM: this profile allows using the DLMS/COSEM Application layer and the COSEM object model as specified in IEC 62056-5-3 Ed. 1.0:?? and in IEC 62056- 6-2 Ed. 1.0:?? respectively. The three profiles use the same physical layer and they are fully compatible@ meaning that devices implementing any of these profiles can be operated on the same bus. The transmission medium is twisted pair using carrier signalling and it is known as the Euridis Bus.

IEC 62056-3-1:2013 history

• 0000 IEC 62056-3-1:2021 RLV
• 2013 IEC 62056-3-1:2013 Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of local area networks on twisted pair with carrier signalling

IEC 62056-3-1:2013 Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of local area networks on twisted pair with carrier signalling has been changed from IEC 62056-31:1999 Electricity metering - Data exchange for meter reading, tariff and load control - Part 31: Use of local area networks on twisted pair with carrier signalling.