CJ/T 187-2013
Gas steaming oven (English Version)

Standard No.

CJ/T 187-2013

Language

Chinese, Available in English version

Release Date

2013

Published By

Professional Standard - Urban Construction

Latest

CJ/T 187-2013

Replace

CJ/T 187-2003

Scope

This standard specifies the terms and definitions, classification and models, structure and materials, requirements, test methods, inspection rules, labels, warnings and instructions for use, as well as packaging, transportation and storage of gas steamers using town gas as fuel. This standard applies to fired steamers (hereinafter referred to as steamers) whose rated heat load is not greater than 80kW and the steam pressure in the steam chamber is not greater than 500Pa (gauge pressure). The urban gas referred to in this standard is the gas that complies with GB/T 13611.

CJ/T 187-2013 Referenced Document

• GB 16914-2003 General safety technique conditions of gas burning appliances
• GB 4706.1 Household and similar electrical appliances-Safety Part 1:General requirements
• GB 4806.1 National Food Safety Standard General Safety Requirements for Food Contact Materials and Products*， 2016-10-19 Update
• GB 5749 Hygienic Standards for Drinking Water*， 2022-03-15 Update
• GB 9684 National Food Safety Standard Stainless Steel Products
• GB/T 11170 Stainless steel .Determination of multi-element contents.Spark discharge atomic emission spectrometric method (Routine method)
• GB/T 12771 Welded stainless steel pipes for fluid transport*， 2019-10-18 Update
• GB/T 13306 Plates
• GB/T 13611 Classification and basic characteristics of city gas*， 2018-03-15 Update
• GB/T 1527 Drawn tube of copper and copper alloys*， 2017-07-12 Update
• GB/T 16411 General test method for domestic gas burning appliances*， 2023-08-06 Update
• GB/T 17219 Standard for safety evaluation of equipment and protective materials in drinking water system
• GB/T 191 Packaging.Pictorial marking for handling of goods
• GB/T 21873 Rubber seals.Joint rings for water supply,drainage and sewerage pipelines.Specification for materials
• GB/T 2828.2 Inspection procedures by count sampling - part 2 : sampling plans for isolated lot inspection retrieved by limit quality LQ
• GB/T 3091 Welded steel pipes for low pressure liquid delivery*， 2015-09-11 Update
• GB/T 3280 Cold rolled stainless steel plate, sheet and strip*， 2015-09-11 Update
• GB/T 3287 Malleable cast iron pipe fittings
• GB/T 3768 Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Survey method using an enveloping measurement surface over a reflecting plane*， 2017-12-29 Update
• GB/T 7306.1 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1:Parallel internal and taper external threads
• GB/T 7306.2 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2:Taper internal and external threads
• GB/T 7307 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
• GB/T 8163 Seamless steel pipes for liquid service*， 2018-05-14 Update
• GB/T 8464 Iron, copper and stainless steel threaded connection valves*， 2023-03-17 Update
• GB/T 9969 General principles for preparation of instructions for use of industrial products

CJ/T 187-2013 history

• 2013 CJ/T 187-2013 Gas steaming oven
• 2002 CJ/T 187-2003 Gas steaming oven