ASTM E2869-13
Standard Digital Reference Images for Magnesium Castings

Standard No.
ASTM E2869-13
Release Date
2013
Published By
American Society for Testing and Materials (ASTM)
Status
Replace By
ASTM E2869-17
Latest
ASTM E2869-17
Scope

4.1 These digital reference images are intended for reference only, but are so designed that acceptance standards, which may be developed for particular requirements, can be specified in terms of these digital reference images. The illustrations are digital images prepared from castings that were produced under conditions designed to develop the discontinuities. The images of the 1/4 in. (6.4 mm) castings are intended to be used in the thickness range up to and including 1/2 in. (12.7 mm). The images of the 3/4 in. (19.1 mm) castings are intended to be used in the thickness range of over 1/2 in. (12.7 mm), up to and including 2 in. (50.8 mm).

4.2 Image Deterioration—Many conditions can affect the appearance and functionality of digital reference images. For example, electrical interference, hardware incompatibilities, and corrupted files or drivers may affect their appearance. The ASTM E2002 line pair gauges located in the lower right hand corner of each digital reference can be used as an aid to detect image deterioration by comparing the measured resolution using the gauges to the resolution stated on the digital reference image. Do not use the digital reference images if their appearance has been adversely affected such that the interpretation and use of the images could be influenced.

4.3 Agreement should be reached between cognizant engineering organization and the supplier that the system used by the supplier is capable of detecting and classifying the required discontinuities.

1.1 These digital reference images illustrate the types and degrees of discontinuities that may be found in magnesium-alloy castings. The castings illustrated are in thicknesses of 1/4 in. (6 mm) and 3/4 in. (19.1 mm).

1.2 All areas of this standard may be open to agreement between the cognizant engineering organization and the supplier, or specific direction from the cognizant engineering organization. These items should be addressed in the purchase order or the contract.

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4 These digital reference images are not intended to illustrate the types and degrees of discontinuities found in magnesium-alloy castings when performing film radiography. If performing film radiography of magnesium-alloy castings, refer to Reference Radiographs E155.

1.5 Only licensed copies of the software and images shall be utilized for production examination. A copy of the ASTM/User license agreement shall be kept on file for audit purposes.

Note 1The set of digital reference images consists of 14 digital files, software to load the desired format and specific instructions on the loading ......

ASTM E2869-13 Referenced Document

  • ASTM E1316 Standard Terminology for Nondestructive Examinations
  • ASTM E155 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
  • ASTM E2002 Standard Practice for Determining Total Image Unsharpness in Radiology
  • ASTM E2446 Standard Practice for Manufacturing Characterization of Computed Radiography Systems
  • ASTM E2597 Standard Practice for Manufacturing Characterization of Digital Detector Arrays

ASTM E2869-13 history

  • 2017 ASTM E2869-17 Standard Digital Reference Images for Magnesium Castings
  • 2013 ASTM E2869-13 Standard Digital Reference Images for Magnesium Castings
Standard Digital Reference Images for Magnesium Castings



Copyright ©2024 All Rights Reserved