NB/SH/T 0870-2013 Standard test method for dynamic viscosity and density of liquids by Stabinger viscometer (and the calculation of kinematic viscosity) (English Version)
This standard specifies a method for the simultaneous determination of the dynamic vis osity (η) and density (ρ) of transparent and opaque liquid petroleum products and crude oil. Kinematic vis osity (υ) can be obtained by dividing dynamic vis osity (η) by density at the same temperature (ρ). This standard applies to the determination of dynamic vis osity and density of transparent and opaque liquid petroleum products and crude oil and the calculation of kinematic vis osity. The test results of this standard depend on the nature of the sample and are applicable to liquids in which shear stress and shear rate are proportional (i.e. Newtonian fluids). This standard only examines the precis on of the base oil. When the temperature is 40°C, the dynamic vis osity range of the sample is 2.05mPa·s ~ 456mPa·s; when the temperature is 100°C, the dynamic vis osity range of the sample is 0.83mPa·s ~ 31.6mPa · s; when the temperature is 15°C, the sample density range is 0.82 g/cm ~ 0.92g/cm (see 15.4). This standard may also be applied to the determination of sample types, vis osity, density and temperature conditions beyond the above, but the precis on and bias of Chapter 15 may not apply.
NB/SH/T 0870-2013 Referenced Document
ASTM D2162 Standard Test Method for Basic Calibration of Master Viscometers and Viscosity Oil Standards
ASTM D4052 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
GB/T 1995 Petroleum products--Calculation of viscosity index
SH/T 0604 Crude petroleum and petroleum products.Determination of density.Oscillating U-tube Method
NB/SH/T 0870-2013 history
2020NB/SH/T 0870-2020 Determination of dynamic viscosity and density of petroleum products and calculation of kinematic viscosity Stabinger viscometer method
2013NB/SH/T 0870-2013 Standard test method for dynamic viscosity and density of liquids by Stabinger viscometer (and the calculation of kinematic viscosity)