EN ISO 13934-1:2013 PDF

Scope: This part of ISO 13934 specifies a method for determining the maximum tensile strength and maximum tensile elongation of textile fabrics using the strip tensile test. NOTE ISO 13934-2 describes the procedure known as grab tensile testing. For informative references, see the literature references. The test applies primarily to woven textiles, including fabrics, which exhibit elastic properties due to the presence of elastomeric fibers or due to mechanical or chemical treatment. It can also be applied to fabrics made using other techniques. It is usually not applicable to geotextiles, nonwovens, coated fabrics, fiberglass fabrics and textile fabrics made of carbon fibers or polyolefin ribbon yarns (see literature references). The procedure determines the determination of the maximum tensile force and maximum tensile force elongation both on measurement samples in a normal climate for testing and in a wet state. Only tensile testing machines with constant testing speed (CRE) can be used for this procedure.

EN ISO 13934-1:2013 Referenced Document

ISO 10012:2003 Measurement management systems - Requirements for measurement processes and measuring equipment
ISO 139:2005 Textiles - Standard atmospheres for conditioning and testing
ISO 3696:1987 Water for analytical laboratory use; Specification and test methods
ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system

2013 EN ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
1999 EN ISO 13934-1:1999 Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip Method ISO 13934-1:1999