This European Standard specifies and classifies the component/product performance characteristics which may be necessary for the design and dimensioning of residential ventilation systems to provide the predetermined comfort conditions of temperature, air velocity, humidity, hygiene and sound in the occupied zone. It defines those performance characteristics (mandatory or optional) which shall be determined, measured and presented according to relevant test methods. It provides a classification scheme which leads to a full definition of product properties based on test methods described in various EN Standards and gives an overview of the Test Standards. Distinction between mandatory and optional requirement is left to each national regulations. The codification part in Annex A and the classification part in Clause 4 apply to the following products: mechanical supply and exhaust ventilation units for single dwellings according to EN 13141-7; un-ducted mechanical supply and exhaust ventilation units for a single room according to EN 13141-8. This European Standard does not apply to other products such as filters, fire dampers, ducts, control devices and sound attenuators, which may also be incorporated in residential ventilation. This European Standard does not cover requirements raised by European Directives, for example: low voltage directive, EMC directive and other requirements such as corrosion, resistance and snow penetration.
EN 13142:2013 Referenced Document
EN 12097:2006 Ventilation for Buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems
EN 12792:2003 Ventilation for buildings - Symbols, terminology and graphical symbols
EN 13141-10:2008 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 10: Humidity controlled extract air terminal device
EN 13141-1:2004 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 1: Externally and internally mounted air transfer devices
EN 13141-2:2010 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices
EN 13141-3:2004 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use
EN 13141-4:2011 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential ventilation systems
EN 13141-5:2004 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 5: Cowls and roof outlet terminal devices*， 2024-04-20 Update
EN 13141-6:2004 Ventilation for buildings Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling
EN 13141-7:2010 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for*， 2024-04-20 Update
EN 13141-8:2006 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems int
EN 13141-9:2008 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 9: Externally mounted humidity controlled air transfer device
EN 60335-2-31:2003 Household and similar electrical appliances - Safety Part 2-31: Particular requirements for range hoods and other cooking fume extractors (Incorporating Corrigendum December 2005; Incorporates Amendment A2: 2009; Remains Current)
EN 779:2012 Particulate air filters for general ventilation - Determination of the filtration performance
EN 13142:2013 history
2021EN 13142:2021 Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics
2013EN 13142:2013 Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics
2004EN 13142:2004 Ventilation for buildings Components/products for residential ventilation Required and optional performance characteristics