ASTM D7306-07(2013)
Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation

Standard No.

ASTM D7306-07(2013)

Release Date

2007

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM D7306-07(2017)

Latest

ASTM D7306-07(2017)

Scope

5.1 This practice can be used by paint formulators to determine if a given paint has the ability to form a film at low temperatures. This practice can be used as an aid for determining coalescing solvent level required to form a good film. Test Method D3793 compares the porosity of a film drawn down at room temperature to another film drawn down and cured at low temperature.

5.2 This practice provides no absolute information, rather ranking only of the selected series of paints.

5.3 This practice can provide a pass-fail situation if known acceptable and unacceptable paints are included in the test.

1.1 This practice specifies a laboratory procedure for evaluating the ability of a latex paint to form a uniform film free of visible defects at low temperatures.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D7306-07(2013) history

• 2017 ASTM D7306-07(2017) Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation
• 2007 ASTM D7306-07(2013) Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation
• 2007 ASTM D7306-07 Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation