GB/T 8619-1988
Method of the strength test for brazed and soldered seam (English Version)

Standard No.

GB/T 8619-1988

Language

Chinese, Available in English version

Release Date

1988

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Status

Be replaced 2008-11

Replace By

GB/T 11363-2008

Latest

GB/T 11363-2008

Scope

This standard is developed for the general mechanical properties of soft and hard brazing joints. This standard applies to the instantaneous tensile strength, shear strength and high temperature creep strength of brazing seams of ferrous metals, nonferrous metals and their alloys in cold, room temperature, and hot states, and the soft brazing seams in cold, cold, and hot states. Determination of instantaneous shear strength and creep strength at room temperature and hot state. This standard specifies the shape of the tensile and shear specimens used and the uniform method of operation, so that the test results can be reproduced and compared.

GB/T 8619-1988 history

• 2008 GB/T 11363-2008 Test method of the strength for brazed and soldered joint
• 1988 GB/T 8619-1988 Method of the strength test for brazed and soldered seam

GB/T 8619-1988 Method of the strength test for brazed and soldered seam was changed to GB/T 11363-2008 Test method of the strength for brazed and soldered joint.