ASTM D5747/D5747M-08(2013)e1
Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
- Standard No.
- ASTM D5747/D5747M-08(2013)e1
- Release Date
- 2008
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM D5747/D5747M-20
- Latest
- ASTM D5747/D5747M-21
- Scope
5.1 This practice is intended to provide a list of standard procedures for test programs investigating the chemical resistance of a geomembrane with a liquid waste, leachate, or chemical. This practice should be used in the absence of other specifications required for the particular situation being addressed.
5.2 Chemical resistance, as used in this practice, is not a quantifiable term. This practice is intended to provide a basis of standardization for those wishing to compare or investigate the chemical resistance of a geomembrane. It should be recognized that chemical resistance is a user judgement evaluation and that this practice does not offer procedures for interpreting the results obtained from test procedures contained in this practice. As a practice, this does not produce a test result.
Note 1—This practice is for the chemical resistance assessment of geomembranes and is written in parallel to similar standard practices for geotextiles, geonets, geogrids, geopipes, and geosynthetic clay liners. Each standard is to be considered individually for the geosynthetic under investigation and collectively for all geosynthetics exposed to the potentially harsh chemical environment under consideration.1.1 This practice covers procedures for the testing of geomembranes for chemical resistance with liquid wastes, prepared chemical solutions, and leachates derived from solid wastes.
1.2 This practice covers procedures for testing semi-crystalline, amorphous, elastomeric, and fabric-reinforced geomembranes.
1.3 This practice is intended to be used in conjunction with Practice D5322 or Practice D5496, or both. The scope of this practice is limited to testing and reporting procedures for unexposed and exposed geomembrane samples.
1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 7.
ASTM D5747/D5747M-08(2013)e1 Referenced Document
- ASTM C717 Standard Terminology of Building Seals and Sealants
- ASTM D1004 Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
- ASTM D1505 Standard Test Method for Density of Plastics by the Density-Gradient Technique
- ASTM D2240 Standard Test Method for Properties of Rubber &8212; Durometer Hardness*， 2024-04-20 Update
- ASTM D3417 Standard Test Method for Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC)
- ASTM D3418 Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry
- ASTM D3895 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
- ASTM D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers8212;Tension
- ASTM D413 Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate
- ASTM D4437 Standard Practice for Determining the Integrity of Field Seams Used in Joining Flexible Polymeric Sheet Geomembranes
- ASTM D4439 Standard Terminology for Geosynthetics
- ASTM D4545 Standard Practice for Determining the Integrity of Factory Seams Used in Joining Manufactured Flexible Sheet Geomembranes
- ASTM D4833/D4833M Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products
- ASTM D5199 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics*， 2024-04-20 Update
- ASTM D5322 Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
- ASTM D5323 Standard Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes
- ASTM D5397 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
- ASTM D5496 Standard Practice for In Field Immersion Testing of Geosynthetics
- ASTM D624 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
- ASTM D638 Standard Test Method for Tensile Properties of Plastics
- ASTM D751 Standard Test Methods for Coated Fabrics
- ASTM D882 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
- ASTM D883 Standard Terminology Relating to Plastics
- ASTM D907 Standard Terminology of Adhesives
- ASTM E793 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
- ASTM E794 Standard Test Method for Melting and Crystallization Temperatures by Thermal Analysis
- ASTM F1251 Standard Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices
ASTM D5747/D5747M-08(2013)e1 history
- 2021 ASTM D5747/D5747M-21 Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
- 2020 ASTM D5747/D5747M-20 Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
- 2008 ASTM D5747/D5747M-08(2013)e1 Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
- 2008 ASTM D5747-08 Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
- 1995 ASTM D5747-95a(2002) Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
- 1995 ASTM D5747-95a Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
