This standard specifies the structural type, requirements, test methods, inspection rules, marking, packaging, transportation and storage of semi-cooled and semi-pressurized liquefied gas storage tanks (hereinafter referred to as storage tanks) for liquefied gas carriers. This standard is applicable to liquefied gas transport ships with a design vapor pressure of not more than 0.8 MPa, a design temperature of -165°C ~ -10°C, and storage media for liquefied natural gas (LNG), liquefied petroleum gas (LPG), ethylene, and vinyl chloride (VCM). ), liquid ammonia and other liquefied gases, and the design, manufacture and acceptance of C-type independent storage tanks installed inside the cargo hold of the ship hull. This standard also applies to the design, manufacture and acceptance of C-type independent storage tanks (hereinafter referred to as deck tanks) installed on open-air decks for liquefied gas transport ships with a design vapor pressure of not more than 2.0 MPa and a design temperature of -165°C ~ 45°C. .
CB/T 4241-2013 Referenced Document
EN 10028-4:2009 Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
GB/T 14977-2008 General requirement for surface condition of hot-rolled steel plates
GB/T 709-2006 Dimension, shape, weight and tolerances for hot-rolled steel plates and sheets
GB/T 8923.1-2011 Preparation of steel substrates before application of paints and related products.Visual assessment of surface cleanliness.Part 1:Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coa
JB/T 4711 Coating and packing for pressure vessels transport
CB/T 4241-2013 history
2013CB/T 4241-2013 Cargo tanks of semi-pressurised and semi-refrigerated liquefied gas carriers