This standard specifies the terms and definitions, technical requirements, testing and inspection, inspection rules and markings, packaging, transportation and storage of liquid sandblasting machines, as well as sandblasting quality and judgment basis. This standard applies to liquid sandblasting machines (hereinafter referred to as sandblasting machines) whose system working pressure is not greater than 0.8 MPa, which uses abrasive fluid as the medium and is used for surface treatment.
JB/T 10350-2013 Referenced Document
GB 15763.2 Safety glazing materials in building-Part2:Tempered glass
GB 20426 Emission standard for pollutants from coal industry
GB 5226.1 Safety of machinery--Electrical equipment of machines--Part 1: General requirements*, 2019-06-04 Update
GB/T 1186 Rubber hoses, textile-reinforced, for compressed air.Specification*, 2016-12-13 Update
GB/T 13288.2-2011 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 2:Method for the grading of surface profile of abrasive blast-cleaned steel.Comparator procedure
GB/T 191 Packaging.Pictorial marking for handling of goods
GB/T 7932 Pneumatic fluid power-General rules and safety requirements for systems and their components*, 2017-07-12 Update
GB/T 8923 Rust grades and preparation grades of steel surfaces before application of paints and related products
GB/T 9969 General principles for preparation of instructions for use of industrial products
GBZ/T 192.1 Determination of dust in the air of workplace.Part l:Total dust concentration
GBZ/T 192.3 Determination of dust in the air of workplace. Part 3:Distribution of particulate
GBZ/T 192.4 Determination of dust in the air of workplace. Part 4:Content of free silica in dust
HG/T 2184 Rubber hoses, textile-reinforced, for general-purpose water applications
HG/T 2192 Rubber hoses for sand and grit blasting. Specification