EN 14319-1:2013
Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam dispensed system before installation

Standard No.

EN 14319-1:2013

Release Date

2013

Published By

European Committee for Standardization (CEN)

Latest

EN 14319-1:2013

Replace

FprEN 14319-1-2012

Scope

This European Standard specifies requirements for in-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products for the insulation of building equipment and industrial installations, for example industrial storage vessels, pipes and ducts used for the supply of fuels, oil, other liquids, hot and cold water, air and other gases. Depending on the type of foam products complying with this standard, they may have service temperature ranges which lie within the limits of ± 200 °C. This Part 1 of this European Standard is a specification for the rigid foam system before installation.Part 1 of this European Standard describes the produ

EN 14319-1:2013 Referenced Document

• EN 12086:1997 Thermal Insulating Products for Building Applications - Determination of Water Vapour Transmission Properties
• EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
• EN 12939:2000 Thermal Performance of Building Materials and Products - Determination of Thermal Resistance by Means of Guarded Hot Plate and Heat Flow Meter Methods - Thick Products of High and Medium Thermal Resistance*， 2024-04-20 Update
• EN 13172:2012 Thermal insulation products - Evaluation of conformity
• EN 13238:2010 Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
• EN 13468:2001 Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH
• EN 13501-1:2007 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests (Incorporates Amendment A1: 2009)
• EN 13823:2010 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item (Incorporates Amendment A1: 2014)
• EN 14308:2009 Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification (Incorporates Amendment A1: 2013)*， 2024-04-20 Update
• EN 14706:2012 Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature*， 2024-04-20 Update
• EN 1602:1996 Thermal Insulating Products for Building Applications - Determination of the Apparent Density (incorporating corrigendum)
• EN 1604:1996 Thermal Insulating Products for Building Applications - Determination of Dimensional Stability under Specified Temperature and Humidity Conditions
• EN 1606:1996 Thermal Insulating Products for Building Applications - Determination of Compressive Creep (Incorporating Corrigendum)
• EN 312:2010 Particleboards - Specifications
• EN 508-1:2008 Roofing products from metal sheet - Specification for selfsupporting products of steel, aluminium or stainless steel sheet - Part 1: Steel
• EN 520:2004 Gypsum plasterboards - Definitions, requirements and test methods (Incorporates Amendment A1: 2009)*， 2024-04-20 Update
• EN 823:1994 Thermal Insulating Products for Building Applications - Determination of Thickness
• EN 826:1996 Thermal Insulating Products for Building Applications - Determination of Compression Behaviour
• EN ISO 1182 Reaction to fire tests for products - Non-combustibility test (ISO 1182:2020)*， 2020-06-24 Update

EN 14319-1:2013 history

• 2013 EN 14319-1:2013 Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam dispensed system before installation