EN 14318-1:2013 Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation
This European Standard specifies requirements for in-situ formed dispensed rigid polyurethane (PUR) and rigid polyisocyanurate (PIR) foam products when installed into cavity walls.This Part 1 of this European Standard is a specification for the rigid foam dispensing system before installation. Part 1 of this European Standard describes the product characteristics and includes procedures for testing,marking and labelling and the rules for evaluation of conformity.This European Standard does not specify the required levels of all properties that should be achieved by a product to demonstrate fitness for purpose in a particular end-use application. The require
EN 14318-1:2013 Referenced Document
EN 12086:1997 Thermal Insulating Products for Building Applications - Determination of Water Vapour Transmission Properties
EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
EN 12939:2000 Thermal Performance of Building Materials and Products - Determination of Thermal Resistance by Means of Guarded Hot Plate and Heat Flow Meter Methods - Thick Products of High and Medium Thermal Resistance*， 2024-04-20 Update
EN 13172:2012 Thermal insulation products - Evaluation of conformity
EN 13238:2010 Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
EN 13501-1:2007 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests (Incorporates Amendment A1: 2009)
EN 13823:2010 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item (Incorporates Amendment A1: 2014)
EN 1602:1996 Thermal Insulating Products for Building Applications - Determination of the Apparent Density (incorporating corrigendum)
EN 1604:1996 Thermal Insulating Products for Building Applications - Determination of Dimensional Stability under Specified Temperature and Humidity Conditions
EN 1609:1996 Thermal Insulating Products for Building Applications - Determination of Short Term Water Absorption by Partial Immersion (Incorporating Corrigendum)
EN 508-1:2008 Roofing products from metal sheet - Specification for selfsupporting products of steel, aluminium or stainless steel sheet - Part 1: Steel
EN 520:2004 Gypsum plasterboards - Definitions, requirements and test methods (Incorporates Amendment A1: 2009)*， 2024-04-20 Update
EN 823:1994 Thermal Insulating Products for Building Applications - Determination of Thickness
EN ISO 1182:2010 Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010)
EN ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)
EN ISO 354:2003 Acoustics - Measurement of sound absorption in a reverberation room ISO 354:2003
EN 14318-1:2013 history
2013EN 14318-1:2013 Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation