SL 636-2012
Inspection and assessment standard for separated item project construction quality of water conservancy and hydroelectric engineering.Installation of hydraulic turbine generator units (English Version)

Standard No.

SL 636-2012

Language

Chinese, Available in English version

Release Date

2012

Published By

Professional Standard - Water Conservancy

Latest

SL 636-2012

Replace

SDJ 249.3-1988

Scope

This standard is applicable to the construction quality acceptance assessment of unit projects in water conservancy and hydropower projects that meet one of the following conditions: 　——Single unit capacity is 15MW and above; 　——Pulling turbine, nominal diameter of runner is 1.5m and above ; 　——Francis turbines among impact turbines, the nominal diameter of the runner is 2.0m and above; axial flow, oblique flow, and tubular flow turbines, the nominal diameter of the runner is 3.0m and above. Units with single machine capacity and turbine runner nominal diameter smaller than the above provisions can also refer to the implementation.

SL 636-2012 Referenced Document

• DL/T 489 Test regulations for static rectification and excitation system of large and medium hydro-generators*， 2018-07-01 Update
• DL/T 583 Technical conditions for static rectification and excitation system of large and medium hydro-generators*， 2018-04-03 Update
• GB 11120 Lubricating oils for turbines
• GB 50150 Electric equipment installation engineering-standard for hand-over test of electric equipment*， 2016-04-15 Update
• GB 50205 Code for acceptance of construction quality of steel structures*， 2020-01-23 Update
• GB/T 11345 Non-destructive testing of welds, ultrasonic testing technology, testing levels and assessments
• GB/T 3323 Radiographic examination of fusion welded joints in metallic materials
• GB/T 8564-2003 Specification installation of hydraulic turbine generator units
• SL 176 Inspection and assessment specification for construction quality of hydraulic and hydroelectric engineering

SL 636-2012 history

• 2012 SL 636-2012 Inspection and assessment standard for separated item project construction quality of water conservancy and hydroelectric engineering.Installation of hydraulic turbine generator units

SL 636-2012 Inspection and assessment standard for separated item project construction quality of water conservancy and hydroelectric engineering.Installation of hydraulic turbine generator units has been changed from SDJ 249.3-1988 Quality degree evaluation standard for unit engineering of water resources and hydropower capital construction engineering (Part III) Installation engineering of hydroelectric generating sets.