DIN EN ISO 1927-3:2013
Monolithic (unshaped) refractory materials - Part 3: Characterization as received (ISO 1927-3:2012); German version EN ISO 1927-3:2012

Standard No.

DIN EN ISO 1927-3:2013

Release Date

2013

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN ISO 1927-3:2013-03

Latest

DIN EN ISO 1927-3:2013-03

Replace

DIN EN 1402-3:2004 DIN EN ISO 1927-3:2008

Scope

This part of ISO 1927 specifies the methods for the characterization of monolithic (unshaped) refractory materials as received and for checking the homogeneity of a delivery of a product. It is applicable to castables (dense and insulating),gunning materials tap hole clay,injection mixes,dry vibrating mixes,and ramming materials,as defined in ISO 1927-1. NOTE:A check list of appropriate tests is given in Annex A.

DIN EN ISO 1927-3:2013 Referenced Document

• EN 15979 Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation
• EN 15991 Testing of ceramic and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by inductively coupled plasma optical emission spectrometry (ICP OES) with electrothermal vaporisation (ETV)*， 2015-11-01 Update
• ISO 10058-1 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica
• ISO 10058-2 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis
• ISO 10058-3 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
• ISO 12677 Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused cast-bead method
• ISO 14719 Chemical analysis of refractory material glass and glazes - Determination of Fe<(hoch)2+> and Fe<(hoch)3+> by the spectral photometric method with 1,10-phenanthroline
• ISO 14720-1 Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 1: Infrared measurement methods
• ISO 14720-2 Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 2: Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in
• ISO 1927-1 Monolithic (unshaped) refractory products - Part 1: Introduction and classification
• ISO 1927-2 Monolithic (unshaped) refractory products - Part 2: Sampling for testing
• ISO 20565-1 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica
• ISO 20565-2 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis
• ISO 20565-3 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-
• ISO 210 Essential oils — General requirements and guidelines for packaging, conditioning and storage*， 2023-05-01 Update
• ISO 21068-1 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 1: General information and sample preparation
• ISO 21068-2 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon
• ISO 21068-3 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents
• ISO 21078-1 Determination of boron (III) oxide in refractory products - Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes
• ISO 21078-2 Determination of boron(III) oxide in refractory products - Part 2: Acid extraction method for the determination of boron(III) oxide in binder components
• ISO 21079-1 Chemical analysis of refractories containing alumina, zirconia and silica - Refractories containing 5 % to 45 % of ZrO<(Index)2> (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents and dissolution
• ISO 21079-2 Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 % to 45 % of ZrO<(Index)2> (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis
• ISO 565 Test sieves; metal wire cloth, perforated metal plate and electroformed sheet; nominal sizes of openings

DIN EN ISO 1927-3:2013 history

• 2013 DIN EN ISO 1927-3:2013-03 Monolithic (unshaped) refractory materials - Part 3: Characterization as received (ISO 1927-3:2012); German version EN ISO 1927-3:2012
• 2013 DIN EN ISO 1927-3:2013 Monolithic (unshaped) refractory materials - Part 3: Characterization as received (ISO 1927-3:2012); German version EN ISO 1927-3:2012
• 1970 DIN EN ISO 1927-3 E:2008-11 Monolithic (rough) refractory products Part 3: As-is characterization (draft)
• 0000 DIN EN ISO 1927-3:2008
• 2004 DIN EN 1402-3:2004 Unshaped refractory products – Part 3: As-delivered testing; German version EN 1402-3:2003

DIN EN ISO 1927-3:2013 Monolithic (unshaped) refractory materials - Part 3: Characterization as received (ISO 1927-3:2012); German version EN ISO 1927-3:2012 has been changed from DIN EN 1402-3:2004 Unshaped refractory products – Part 3: As-delivered testing; German version EN 1402-3:2003.