JC/T 2115-2012
Non-contact sensing-actuating valves for water supply appliance (English Version)

Standard No.

JC/T 2115-2012

Language

Chinese, Available in English version

Release Date

2012

Published By

Professional Standard - Building Materials

Latest

JC/T 2115-2012

Scope

This standard specifies the terms and definitions, materials, technical requirements, test methods, inspection rules, and signs for faucets, showers, urinal flushers, toilet flushers, and squat toilet flushers controlled by non-contact induction electric valves. , packaging, transportation and storage. This standard is applicable to non-contact induction water supply equipment (hereinafter referred to as "water supply equipment") installed on cold and hot water supply pipelines in buildings, with a working pressure of 0.05MPa ~ 1.0MPa and a working temperature of no more than 90°C.

JC/T 2115-2012 Referenced Document

• GB 4706.1-2005 Household and similar electrical appliances-Safety Part 1:General requirements
• GB/T 10125-2012 Corrosion tests in artificial atmospheres.Salt spray tests*， 2012-12-31 Update
• GB/T 1019 General requirements for the package of household and similar electrical appliances
• GB/T 1176 Casting copper and copper alloys*， 2013-09-18 Update
• GB/T 21873 Rubber seals.Joint rings for water supply,drainage and sewerage pipelines.Specification for materials
• GB/T 23448 Sanitary ware—Flexible hose*， 2019-08-30 Update
• GB/T 2423.1-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold
• GB/T 2423.2-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat
• GB/T 2423.3-2006 Environmental testing for electric and electronic products-Part 2:Tesing method-Test Cab：Damp heat,steady state
• GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)*， 2013-02-15 Update
• GB/T 5231 Designation and chemical composition of wrought copper and copper alloys*， 2022-03-09 Update
• GB/T 6461-2002 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests
• GB/T 7306.1 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1:Parallel internal and taper external threads
• GB/T 7306.2 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2:Taper internal and external threads
• GB/T 7307 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
• HG/T 3097 Rubber seals Jonit rings for pipelines for hot-water supply up to 110℃. Specification for the materials

JC/T 2115-2012 history

• 2012 JC/T 2115-2012 Non-contact sensing-actuating valves for water supply appliance