SAE AS6104-2012
Fitting, Elbow 45 Degrees, Standard and Reducer, 37 Degrees Spherical, Flared

Standard No.

SAE AS6104-2012

Release Date

2012

Published By

Society of Automotive Engineers (SAE)

Status

Be replaced 2018-04

Replace By

SAE AS6104A-2018

Latest

SAE AS6104B-2020

SAE AS6104-2012 Referenced Document

• ASME B46.1-2009 Surface Texture (Surface Roughness, Waviness, and Lay) ( - 2009)*， 2023-12-22 Update
• ASME Y14.36M-1996 Surface Texture Symbols
• ASME Y14.5M-1994 Dimensioning and tolerancing
• SAE AMS-QQ-A-225/9-1997 Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold finished
• SAE AMS-QQ-P-416-2000 Plating@ Cadmium (Electrodeposited)
• SAE AMS2472 ANODIC TREATMENT OF ALUMINUM BASE ALLOYS Sulfuric Acid Process, Dyed Coating
• SAE AMS2486 CONVERSION COATING OF TITANIUM ALLOYS Fluoride - Phosphate Type
• SAE AMS2700-2000 Passivation of Corrosion Resistant Steels
• SAE AMS4124 ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED 5.6Zn - 2.5Mg - 1.6Cu - 0.30Cr (7075-T7351) Stress-Relief Stretched
• SAE AMS4141 ALUMINUM ALLOY DIE FORGINGS 5.6Zn - 2.5Mg - 1.6Cu - 0.25Cr (7075-T73)

SAE AS6104-2012 history

• 2020 SAE AS6104B-2020 FITTING, ELBOW 45°, STANDARD AND REDUCER, 37° SPHERICAL, FLARED
• 2018 SAE AS6104A-2018 FITTING@ ELBOW 45°@ STANDARD AND REDUCER@ 37° SPHERICAL@ FLARED
• 2012 SAE AS6104-2012 Fitting, Elbow 45 Degrees, Standard and Reducer, 37 Degrees Spherical, Flared