DIN EN ISO 19432:2012 PDF

Scope: This International Standard specifies safety requirements, and measures for their verification, for the design and construction of portable, hand-held, internal combustion engine-driven, cut-off machines, intended to be used by a single operator in the cutting of construction materials, such as asphalt, concrete, stone and metal. It is applicable only to those machines designed purposely for use with a rotating, bonded-abrasive and/or super-abrasive (diamond) cut-off wheel having a maximum outer diameter of 430 mm, centre-mounted on, and driven by, a spindle shaft, where the top of the wheel rotates away from the operator .

DIN EN ISO 19432:2012 Referenced Document

ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction
ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs
ISO 14982:1998 Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria
ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane
ISO 4871:1996 Acoustics - Declaration and verification of noise emission values of machinery and equipment
ISO 5349-2:2001 Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement in the workplace
ISO 7293 Forestry machinery - Portable chain-saws - Engine performance and fuel consumption*， 2021-09-30 Update
ISO 7914:2002 Forestry machinery - Portable chain-saws - Minimum handle clearance and sizes
ISO 8041 Response of individuals to vibrations — Measuring equipment — Amendment 1
ISO/TR 11688-1 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning

2012 DIN EN ISO 19432:2012 Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012); German version EN ISO 19432:2012
2010 DIN EN ISO 19432:2010 Building construction machinery and equipment - Portable, hand-held internal combustion engine driven cut-off machines - Safety requirements and testing (ISO 19432:2006); German version EN ISO 19432:2008
2008 DIN EN ISO 19432:2008 Building construction machinery and equipment - Portable, hand-held internal combustion engine driven cut-off machines - Safety requirements and testing (ISO 19432:2006); German version EN ISO 19432:2008
2006 DIN EN ISO 19432:2006 Building construction machinery and equipment - Portable, hand-held internal combustion engine driven cut-off machines - Safety requirements and testing (ISO 19432:2006); German version EN ISO 19432:2006