This European Standard specifies definitions and requirements for cold applied non-structural elastic sealants used for movement joints in floors in building construction for interior and exterior use. Areas of application are: floor joints designed for pedestrian walkways, public areas, movement joints between concrete slabs, areas with pedestrian load, areas used with trolleys, walkable floors, balconies, terraces, warehouses. NOTE Provisions on evaluation of conformity (i.e. Initial Type Testing and Factory Production Control) and marking of these products are given in EN 15651-5. Chemical containment, cold applied joint sealants for concrete pavements to be used in roads, airfields and sewage treatment plants, perimeter seals are excluded.This European Standard does not apply to non-structural sealants in any of non-paste form, to those used in pedestrian walkways.
EN 15651-4:2012 Referenced Document
EN 13238 Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
EN 13501-1:2007+A1 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
EN 15651-5:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 5: Evaluation of conformity and marking
EN ISO 10563 Building and civil engineering sealants - Determination of change in mass and volume (ISO 10563:2023)*， 2023-07-05 Update
EN ISO 10590 Building construction - Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590:2005)
EN ISO 10591 Building and civil engineering sealants - Determination of adhesion/cohesion properties of sealants after immersion in water (ISO 10591:2021)*， 2021-10-31 Update
EN ISO 11358 Plastics - Thermogravimetry (TG) of Polymers - General Principles ISO 11358: 1997
EN ISO 11600 Building construction - Jointing products - Classification and requirements for sealants (ISO 11600:2002/Amd 1:2011)
EN ISO 1183-1:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method ISO 1183-1:2004
EN ISO 11925-2 Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (Incorporating corrigendum January 2011)
EN ISO 7389 Building construction - Jointing products - Determination of elastic recovery of sealants ISO 7389:2002; Supersedes EN 27389:1990*， 2024-04-20 Update
EN ISO 7390 Building construction Jointing products Determination of resistance to flow of sealants Supersedes EN 27390: 1990; ISO 7390: 2003*， 2024-04-20 Update
EN ISO 8339 Building construction - Sealants - Determination of tensile properties (Extension to break)
EN ISO 8340 Building construction - Sealants - Determination of tensile properties at maintained extension
EN ISO 868 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
EN ISO 9046 Building and civil engineering sealants - Determination of adhesion/cohesion properties at constant temperature (ISO 9046:2021)*， 2021-03-31 Update
EN ISO 9047 Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001/Cor 1:2009)
ISO 13640 Buildings and civil engineering works - Sealants - Specifications for test substrates*， 2018-07-01 Update
EN 15651-4:2012 history
2017EN 15651-4:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways
2012EN 15651-4:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways
2010EN 15651-4:2010 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways