DS/EN 61243-1/Corr. 1:2007
Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.

Standard No.

DS/EN 61243-1/Corr. 1:2007

Release Date

2007

Published By

Danish Standards Foundation

Status

Be replaced 2010-04

Replace By

DS/EN 61243-1/A1:2010

Latest

DS/EN 61243-1/A1:2010

Scope

This part of IEC 61243 is applicable to portable voltage detectors, with or without built-in power sources, to be used on electrical systems for voltages of 1 kV to 765 kV a.c., and frequencies of 50Hz and/or 60 Hz. This part applies only to voltage detectors of capacitive type used in contact with the part to be tested, as a complete device including its insulating element or as a separate device, adaptable to an insulating stick which, as a separate tool, is not covered by this standard. Other types of voltage detectors are not covered by this part of the standard. Some restrictions on their use are applicable in the case of factory-assembled switchgear a

DS/EN 61243-1/Corr. 1:2007 history

• 2021 DS/EN IEC 61243-1:2021 Live working – Voltage detectors – Part 1: Capacitive type to be used for voltages exceeding 1 kV AC
• 2010 DS/EN 61243-1/A1:2010 Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
• 2007 DS/EN 61243-1/Corr. 1:2007 Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
• 2005 DS/EN 61243-1:2005 Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.