DS/EN 10351:2011
Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method]

Standard No.

DS/EN 10351:2011

Release Date

2011

Published By

Danish Standards Foundation

Latest

DS/EN 10351:2011

Scope

This European Standard specifies an inductively coupled plasma optical emission spectrometry routine method for the analysis of unalloyed and low alloyed steels, whose iron content shall be at least 95 %.This method is applicable to the elements listed in Table 1 within the ranges shown.Table 1 - Application ranges(...)In all cases, the ranges specified can be extended or adapted (after validation) for the determination of other mass fractions, provided that the iron content in the samples under concern is above 95 %.Other elements may be included. However such elements and their mass fractions should be carefully checked, taking into account the possible i

DS/EN 10351:2011 history

• 2011 DS/EN 10351:2011 Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method]