DS/EN ISO 10140-3:2010
Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation

Standard No.

DS/EN ISO 10140-3:2010

Release Date

2010

Published By

Danish Standards Foundation

Status

Be replaced 2021-05

Replace By

DS/EN ISO 10140-3:2021

Latest

DS/EN ISO 10140-3:2021

Replace

DS/EN ISO 140-1:1998 DS/EN ISO 140-1/A1:2005 DS/ISO 140-10:1993 DS/EN 20140-10:1993 DS/EN ISO 140-3:1995 DS/EN ISO 140-3/A1:2005 DS/EN ISO 140-6:1998 DS/EN ISO 140-8:1998 DS/EN ISO 140-11:2005 DS/EN ISO 140-16:2006

Scope

This document specifies laboratory methods for measuring the impact sound insulation of floor assemblies.The test results can be used to compare the sound insulation properties of building elements, to classify elements according to their sound insulation capabilities, to help design building products which require certain acoustic properties, and to estimate the in-situ performance in complete buildings.The measurements are performed in laboratory test facilities in which sound transmission via flanking paths is suppressed. The results of measurements made in accordance with this document shall not be applied directly to the field situation without account

DS/EN ISO 10140-3:2010 history

• 2021 DS/EN ISO 10140-3:2021 Acoustics – Laboratory measurement of sound insulation of building elements – Part 3: Measurement of impact sound insulation (ISO 10140-3:2021)
• 2010 DS/EN ISO 10140-3:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation
• 0000 DS/EN ISO 140-16:2006
• 0000 DS/EN ISO 140-3/A1:2005
• 0000 DS/EN ISO 140-11:2005
• 0000 DS/EN ISO 140-8:1998
• 0000 DS/EN ISO 140-3:1995
• 0000 DS/EN 20140-10:1993

DS/EN ISO 10140-3:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation was changed to BS EN ISO 14362-3:2017 Textiles. Methods for determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants, which may release 4-aminoazobenzene.