ISO 13000-1:2005
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation

Standard No.
ISO 13000-1:2005
Release Date
2005
Published By
International Organization for Standardization (ISO)
Status
Replace By
ISO 13000-1:2021
Latest
ISO 13000-1:2021
Scope
This part of ISO 13000 specifies the requirements for processed unfilled polytetrafluoroethylene (PTFE) products, which may occur in several forms. The PTFE used to make the semi-finished product is described in ISO 12086-1 and, as provided in ISO 12086-1, may contain up to 1 % of a comonomer. The PTFE used to make the semi-finished product may be virgin, reprocessed or recycled resin. The addition of up to 1,5 % by mass of pigment or colorant is permitted. This part of ISO 13000 allows for four grades based on tensile strength and elongation at break. The semi-finished products can be as-processed (type P) or dimensionally stabilized (type S) and may also have specified electrical properties or other properties when they are required for an application. NOTE References to other standard specifications for semi-finished products made from polytetrafluoroethylene are listed in Annex A for information.

ISO 13000-1:2005 Referenced Document

  • ISO 1043-1 Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics AMENDMENT 1: New symbol ST for syndiotactic*2011-01-01 Update
  • ISO 12086-1 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications; Technical Corrigendum 1*2006-08-01 Update
  • ISO 13000-2 Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 2: Preparation of test specimens and determination of properties*2021-08-13 Update
  • ISO 472 Plastics — Vocabulary — Amendment 1: Additional items*2018-10-31 Update

ISO 13000-1:2005 history

  • 2021 ISO 13000-1:2021 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation
  • 2005 ISO 13000-1:2005 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation
  • 1997 ISO 13000-1:1997 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation



Copyright ©2024 All Rights Reserved