BS EN 14784-2:2005
Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - General principles for testing of metallic materials using X-rays and gamma rays
- Standard No.
- BS EN 14784-2:2005
- Release Date
- 2005
- Published By
- British Standards Institution (BSI)
- Status
- 2017-12
- Replace By
- BS EN ISO 16371-2:2017
- Latest
- BS EN ISO 16371-2:2017
- Replace
- 03/115416 DC-2003
- Scope
- This European Standard specifies fundamental techniques of computed radiography with the aim of enabling satisfactory and repeatable results to be obtained economically. The techniques are based on the fundamental theory of the subject and tests measurements. This document specifies the general rules for industrial computed X-and gamma radiography for flaw detection purposes, using storage phosphor imaging plates (IP). It is based on the general principles for radiographic examination of metallic materials on the basis of films (EN 444 and ISO 5579). The basic set-up of radiation source, detector and the corresponding geometry shall be applied in agreement with EN 444 and ISO 5579 and the corresponding product standards as e.g. EN 1435 for welding and EN 12681 for foundry. It does not lay down acceptance criteria of the imperfections.
BS EN 14784-2:2005 history
- 2017 BS EN ISO 16371-2:2017 Non-destructive testing. Industrial computed radiography with storage phosphor imaging plates. General principles for testing of metallic materials using X-rays and gamma rays
- 2005 BS EN 14784-2:2005 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - General principles for testing of metallic materials using X-rays and gamma rays
