General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest
GB/T 28607-2012
Scope
This standard specifies the test methods for evaluating the compatibility of five standard elastomeric materials, which are the most typical sealing materials used in contact with engine oil, with engine oil. This standard provides formulations, mixing procedures and vulcanization procedures for five standard elastomeric materials: a) Nitrile-butadiene rubber-1 (NBR-1); b) Nitrile-butadiene rubber-2 (NBR-2); c) Fluorine rubber (FKM); d) Acrylic rubber (ACM); e) Silicone rubber (VMQ). This standard is applicable to evaluate the influence of generator oil on this elastomer by measuring the change of hardness, rate of change of tensile strength, rate of change of elongation at break, and volume change of the standard sample of standard elastomer before and after immersion under controlled conditions. .
GB/T 28607-2012 Referenced Document
GB/T 1232.1 Rubber,unvulcanized—Determinations using a shearing-disc viscometer—part 1: Determination of Mooney viscosity*, 2016-10-13 Update
GB/T 1690-2006 Rubber, vulcanized or thermoplastic. Determination of the effect of liquids
GB/T 528 Rubber,vulcanized or thermoplastic.Determination of tensile stress-strain properties
GB/T 533 Rubber,vulcanized or thermoplastic.Determination of density
GB/T 6031-1998 Rubber, Vulcanized or thermoplastic--Determination of hardness (hardness between 10 IRHD and 100IRHD)
GB/T 6038-2006 Rubber test mixes. Preparation, mixing and vulcanization. Equipment and procedures
GB/T 28607-2012 history
2012GB/T 28607-2012 Determination of compatibility between standard elastomeric materials and automotive engine oil