General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest
GB/T 28494-2012
Scope
This standard specifies the definition and symbols, materials, general requirements, technical requirements, test methods, inspection rules, signs, packaging, transportation and storage of thermoplastic globe valves (hereinafter referred to as globe valves). This standard is applicable to manual or power-driven shut-off valves in civil hot and cold water systems, drinking water systems, heating piping systems, and piping systems that transport industrial water and other non-aqueous media under the conditions of considering the chemical resistance and heat resistance of materials . The range of nominal sizes is DN 10, DN 15, DN 20, DN 25, DN32, DN40, DN 50, DN 65, DN80, DN100, DN125 and DN 150. The nominal pressure range is PN0.6, PN1.0, PN1.6.
GB/T 28494-2012 Referenced Document
EN 1267:1999 Valves - Test of Flow Resistance Using Water as Test Fluid
GB/T 17219-1998 Standard for safety evaluation of equipment and protective materials in drinking water system
GB/T 19993-2005 Thermoplastics piping systems for hot and cold water supply.Test method for the resistance of pipes and fittings mounted assemblies to thermal cycling
GB/T 21300-2007 Plastics pipes and fittings-Determination of opacity
GB/T 27726-2011 Thermoplastics valves.Pressure test methods and requirements
GB/T 2828.1-2003 Sampling procedures for inspection by attributes--Part 1: Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 4217-2008 Thermoplastics pipes for the conveyance of fluids.Nominal outside diameters and nominal pressures
GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1:Parallel internal and taper external threads
GB/T 7306.2-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2:Taper internal and external threads
GB/T 8806-2008 Plastics piping systems.Plastics components.Determination of dimensions
ISO 10931:2005 Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system
ISO 15493:2003 Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and piping systems; Metric series
ISO 15494:2003 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the systems; Metric series
GB/T 28494-2012 history
2012GB/T 28494-2012 Globe valves of thermoplastics materials