These test methods cover small-specimen tests for wood-base fiber and particle panel materials that are made to provide:
Data for comparing the mechanical and physical properties of various materials,
Data for determining the influence on the basic properties of such factors as raw material and processing variables, post-treatments of panels, and environmental influences, and
Data for manufacturing control, product research and development, and specification acceptance.
Not all the tests outlined in these test methods may be necessary to evaluate any particular panel for any specified use. In each instance, therefore, it will be necessary to determine which tests shall be made.
1.1 Part AGeneral Test Methods for Evaluating the Basic Properties of Wood-Base Fiber and Particle Panel Materials. These test methods cover the determination of the properties of wood-base fiber and particle panel materials that are produced as mat-formed panels such as particleboard, medium-density fiberboard, hardboard, and oriented strand board.
| Section |
Significance and Use | 3 |
Apparatus | 4 |
Test Specimens | 5 |
Moisture Content and Conditioning Requirements | 6 |
Accelerated Aging | 7 |
Size, Physical Properties and Appearance of Panels | 8 |
Static Bending | 9 |
Tension Parallel to Surface | 10 |
Tension Perpendicular to Surface | 11 |
Compression Parallel to Surface | 12 |
Fastener Holding Tests: | |
Lateral Nail Resistance | 13 |
Nail Withdrawal | 14 |
Nail-Head Pull-Through | 15 |
Direct Screw Withdrawal | 16 |
Hardness | 17 |
Hardness Modulus | 18 |
Shear in the Plane of the Panel | 19 |
Glue-Line Shear (Block Type) | 20 |
Falling Ball Impact | 21 |
Abrasion Resistance by the U.S. Navy Wear Tester | 22 |
Moisture Tests: | |
Water Absorption and Thickness Swelling | 23 |
Linear Expansion with Change in Moisture Content | 24 |
......
ASTM D1037-12 Referenced Document
- ASTM C273 Standard Test Method for Shear Properties of Sandwich Core Materials
- ASTM D143 Standard Test Methods for Small Clear Specimens of Timber
- ASTM D1554 Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials
- ASTM D2395 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
- ASTM D2915 Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber
- ASTM D3043 Standard Methods of Testing Structural Panels in Flexure
- ASTM D3501 Standard Test Methods for Wood-Based Structural Panels in Compression
- ASTM D4442 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
- ASTM D905 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
- ASTM E4 Standard Practices for Force Verification of Testing Machines
- ASTM E691 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D1037-12 history
- 2020 ASTM D1037-12(2020) Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
- 2012 ASTM D1037-12 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
- 2006 ASTM D1037-06a Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
- 2006 ASTM D1037-06 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
- 1999 ASTM D1037-99 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
- 1978 ASTM D1037-78 Standard Methods of Evaluating the Properties of Wood-Base Fiber and Particle Panel Materials
Copyright ©2024 All Rights Reserved