DIN EN 14784-2:2005
Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays; English version of DIN EN 14784-2
- Standard No.
- DIN EN 14784-2:2005
- Release Date
- 2005
- Published By
- German Institute for Standardization
- Status
- 2018-02
- Replace By
- DIN EN ISO 16371-2:2018
- Latest
- DIN EN ISO 16371-2:2018
- Scope
- This European Standard specifies fundamental techniques of computed radiography with the aim of enabling satisfactory and repeatable results to be obtained economically. The techniques are based on the fundamental theory of the subject and tests measurements. This document specifies the general rules for industrial computed X- and gamma radiography for flaw detection purposes, using storage phosphor imaging plates (IP). It is based on the general principles for radiographic examination of metallic materials on the basis of films (EN 444 and ISO 5579). The basic set-up of radiation source, detector and the corresponding geometry shall be applied in agreement with EN 444 and ISO 5579 and the corresponding product standards as e.g. EN 1435 for welding and EN 12681 for foundry. It does not lay down acceptance criteria of the imperfections.
DIN EN 14784-2:2005 Referenced Document
- EN 14784-1:2005 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 1: Classification of systems
- EN 462-1 Non-Destructive Testing - Image Quality of Radiographs - Part 1: Image Quality Indicators (Wire Type) - Determination of Image Quality Value
- EN 462-2 Non-Destructive Testing - Image Quality of Radiographs Part 2: Image Quality Indicators (Step/Hole Type) - Determination of Image Quality Value
- EN 462-3 Non-Destructive Testing - Image Quality of Radiographs - Part 3: Image Quality Classes for Ferrous Metals
- EN 462-4 Non-Destructive Testing - Image Quality of Radiographs - Part 4: Experimental Evaluation of Image Quality Values and Image Quality Tables
- EN 462-5 Non-Destructive Testing - Image Quality of Radiographs - Part 5: Image Quality Indicators (Duplex Wire Type), Determination of Image Unsharpness Value
DIN EN 14784-2:2005 history
- 2018 DIN EN ISO 16371-2:2018 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays (ISO 16371-2:2017)
- 2005 DIN EN 14784-2:2005 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays; English version of DIN EN 14784-2
