For purposes of determining compliance with the specified limits for requirements of the properties listed in the following table, an observed value or a calculated value shall be rounded as indicated in accordance with the rounding method of Practice E29.
Property | Rounded Unit for Observed or Calculated Value |
| |
Chemical composition | nearest unit in the last righthand place of figures |
Tensile strength and yield strength | nearest ksi (Nearest 5 MPa) |
Grain size: Up to 0.055 mm, incl, Over 0.055 mm | nearest multiple of 0.005 mm to the nearst 0.010 mm |
Expansion: | Nearest 1 % |
1.1 This specification established the requirements for welded tube of copper and various copper alloys up to 31/8in., inclusive, in diameter, for use in surface condensers, evaporators, heat exchangers, and general engineering applications. The following coppers or copper alloys are involved:
Copper or Copper Alloy UNS No.2 | Previously Used Designation | Type of Metal |
C10800A | ... | oxygen-free, low phosphorus |
C12200A | ... | DHP phosphorized, high residual phosphorus |
C19400 | ... | copper-iron alloy |
C23000 | ... | red brass |
C44300 | ... | arsenical admiralty |
C44400 | ... | antimonial admiralty |
C44500 | ... | phosphorized admiralty |
C68700 | ... | arsenical aluminum brass |
C70400 | ... | 95-5 copper-nickel |
C70600 | ... | 90-10 copper-nickel |
C70620 | ... | 90-10 copper-nickel (Modified for Welding) |
C71000 | ... | 80-20 copper-nickel |
C71500 | ... | 70-30 copper-nickel |
ASTM B543/B543M-12 Referenced Document
- ASTM B153 Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
- ASTM B154 Standard Test Method for Mercurous Nitrate Test for Copper and Copper Alloys
- ASTM B224 Standard Classification of Coppers
- ASTM B846 Standard Terminology for Copper and Copper Alloys
- ASTM B858 Standard Test Method for Ammonia Vapor Test for Determination Susceptibility to Stress Corrosion Cracking in Copper Alloys
- ASTM B900 Standard Practice for Packaging of Copper and Copper-Alloy Mill-Products for U.S. Government Agencies
- ASTM B968/B968M Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube
- ASTM E112 Standard Test Methods for Determining Average Grain Size
- ASTM E118 Standard Test Methods for Chemical Analysis of Copper-Chromium Alloys
- ASTM E243 Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes
- ASTM E255 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
- ASTM E29 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
- ASTM E3 Standard Practice for Preparation of Metallographic Specimens
- ASTM E478 Standard Test Methods for Chemical Analysis of Copper Alloys
- ASTM E527 Standard Practice for Numbering Metals and Alloys (UNS)
- ASTM E53 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
- ASTM E54
- ASTM E62 Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
- ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials
ASTM B543/B543M-12 history- 2018 ASTM B543/B543M-18 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
- 2012 ASTM B543/B543M-12 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
- 2007 ASTM B543-07e1 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
- 2007 ASTM B543-07 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
- 1996 ASTM B543-96(2003) Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
- 1996 ASTM B543-96e1 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
- 1996 ASTM B543-96 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
Copyright ©2024 All Rights Reserved
|