DIN EN 12814-3:2005
Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test (including amendment A1:2005); English version of DIN EN 12814-3:2000 + A1:2005
- Standard No.
- DIN EN 12814-3:2005
- Release Date
- 2005
- Published By
- German Institute for Standardization
- Status
- Replace By
- DIN EN 12814-3:2014
- DIN EN 12814-3 E:2012-07
- Latest
- DIN EN 12814-3:2014-07
- Scope
- This standard specifies the dimensions, the method of sampling and the preparation of the test specimens, and the conditions for performing the tensile creep test perpendicular to the weld in order to determine the long term tensile welding factor. A tensile creep test may be used in conjunction with other tests (e.g. bend test, tensile test, macrographic examination...) to assess the performance of welded assemblies, made from thermoplastics materials. The test is applicable to welded assemblies made from thermoplastics materials filled or unfilled such as tubes and fittings, sheets, plates and profiles, but not reinforced, irrespective of the welding process used.
DIN EN 12814-3:2005 history
- 2014 DIN EN 12814-3:2014-07 Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test; German version EN 12814-3:2014
- 2014 DIN EN 12814-3:2014 Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test; German version EN 12814-3:2014
- 2005 DIN EN 12814-3:2005 Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test (including amendment A1:2005); English version of DIN EN 12814-3:2000 + A1:2005
